Eternal In Silver antibacterial paint 12 kg

ETERNAL IN silver represents antibacterial paint containing colloidal silver, which creates a hygienic surface that is long-lasting resistant to bacterial attack. These coatings achieve the highest possible resistance to wet abrasion, are completely free of unpleasant odor, and do not emit any harmful substances. ETERNAL IN silver is suitable for painting interior walls and ceilings where high demands on hygiene and surface durability apply (children's rooms, schools, kindergartens, nurseries, healthcare facilities or food processing sites).

It is applicable in humid and poorly ventilated areas with frequent bacterial presence (kitchens, bathrooms, laundry rooms, technical rooms, locker rooms). It is primarily intended for lime, lime-cement and gypsum plasters, acrylic plasters, concrete, dispersion and silicate coatings, plasterboard, fiber cement, fiber reinforced cement boards, and other absorbent substrates.

Field of use:
ETERNAL IN silver is intended for painting walls and ceilings in interiors where there are high requirements for hygiene and coating durability, such as interiors of children's rooms, healthcare facilities, schools, kindergartens, nurseries, and food processing sites. ETERNAL IN silver is especially designed for use on lime, lime-cement, and gypsum plasters, acrylic plasters, concrete, dispersion and silicate coatings, plasterboard, fiber cement boards, and other absorbent substrates. For painting one surface, it is recommended to use material from the same batch.

Application:
The paint ETERNAL IN silver is applied to a matured, dry, cohesive, perfectly cleaned, and degreased substrate using a brush, painting brush, roller, or spraying at a substrate and ambient temperature ranging from 5–25 °C. Substrates affected by mold must be (wet!) treated to remove mold and sanitized with a suitable fungicidal agent, e.g., ETERNAL mold remover. If the mold infestation is caused by condensation (corners, lintels, ceilings), it is appropriate to treat these areas with ETERNAL IN Thermo. Highly absorbent substrates should be primed with special penetrating agents ETERNAL universal primer or paint ETERNAL IN silver diluted with water in a ratio of 3:1. Any substrate stains that may seep through the coatings should be painted with an isolating coating ETERNAL IN stop. ETERNAL IN silver can be applied no sooner than 4 hours after the application of the primer. A second coat can be applied after the first coat has dried, but no sooner than 2 hours.

Consumption:
0.20—0.30 kg/m² for 2 layers

Coverage:
3.3–5.0 m2/kg depending directly on the preparation and quality of the substrate

Warning:
Use biocidal products safely. Always read the label and product information before use.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H412: Harmful to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P273: Avoid release to the environment.
• P501: Dispose of contents/container in accordance with product instructions.