Detecha Izoban color for concrete, RAL 6021 light green, 5 kg

Synthetic coating material for concrete. 100% waterproof, resistant to oils, salt solutions, weak acids and bases, and short-term exposure to diesel. Mechanically resistant. Withstands permanent thermal stress up to +50 °C. Easily repairable by simple recoating. A product with an excellent quality-to-price ratio.

Usage:
Outdoor and indoor coatings for concrete. Concrete floors (garages, non-residential spaces, basements, workshops, balconies, etc.). Concrete pools, water reservoirs (certificate SZÚ Prague), masonry, plasters. Steel tanks coated with a basic anti-corrosive primer (e.g., Fest Primer, Superkov, etc.)

Warning:
Walkable after 8 hours. Fill the pool after 7 days. Final curing takes 14 days to 3 weeks.

Dilution:
If necessary, the coating can be diluted with thinner S 6005.

Coverage:
The coverage of the coating material depends on the quality of the coated surface and ranges from 6 - 8 m² per 1 kg in one layer at an average dry film thickness of 50 μm.

Substrate preparation:
Concrete must be absorbent, optionally roughened, not contaminated, well-matured, dry (maximum relative humidity of the substrate 15%), insulated against rising moisture. It must be cohesive (cohesion of concrete in tension min. 1.5 MPa), free of all dirt and poorly adhering particles. In case of doubt about the suitability for the given substrate (e.g., screed, old coating), we recommend performing a test coating on a smaller area.

Application method:
Before use, it is necessary to thoroughly mix the material and dilute if necessary. We recommend applying a penetrating coat with diluted material in a ratio of 1 part Izoban to 1 part thinner S 6005 on untreated concrete surfaces. For larger areas, it is advisable to use material from one manufacturing batch, or mix different batches to ensure a uniform color shade. Apply with a brush or roller in at least two layers according to the absorbency of the substrate, always after the previous layer has dried. The total thickness of the entire coating system must be approx. 100 µm after drying. A thicker layer of paint significantly prolongs drying and curing time, so it is necessary to proceed with thin layers. For coatings on steel tanks and barrels, we recommend pre-coating the surface with a basic anti-corrosive primer (Fest Primer and Superkov) and applying the subsequent coating with Izoban only after thorough curing of the base for at least 48 hours. Work in a well-ventilated environment at temperatures ranging from +10 to +25 °C. Do not work in direct sunlight!

Warning:
The paint is not intended for coatings that come into direct contact with food, animal feed, and drinking water, and for coatings of children's furniture and toys. It cannot be applied to poorly dried substrates, e.g., in damp, inadequately ventilated areas. The coating is not resistant to gasoline and organic solvents.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• H226: Flammable liquid and vapors.
• H312: Harmful to health in contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H362: May harm nursing infants through breast milk.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spillage.
• P501: Dispose of contents/container according to the instructions on the product.