DENAS NA BETON topcoat for concrete, 0110 gray, 0.7 kg

DENAS NA BETON is a topcoat water-based paint designed for coatings on concrete and fiber-cement surfaces, plinths, stairs, fences, walls, and CETRIS cement-bonded and OSB boards. This coating excellently withstands UV radiation and weather influences, has waterproofing properties, is vapor-permeable, abrasion-resistant, colorfast, and very easy to maintain. It has high coverage capability, dries quickly, and excels in excellent application properties. It is not intended for uncured concrete.

Meets the requirements of standard ČSN EN ISO 1504-2: Product for surface protection - coatings. Declaration of properties no. 003.

Properties of DENAS concrete paint:

• great resistance to mechanical stress and shifting loads
• high resistance to weather and UV radiation
• waterproofing properties
• colorfast
• abrasion-resistant
• vapor-permeable
• very easy to maintain
• Exhibits high coverage
• dries quickly
• excellent application properties

Composition (general):

Mixture of acrylic dispersion, pigments, fillers, and special additives

Application procedure: 

The substrate must be dry, free of dirt and non-adhering layers of substrate as well as any previous older coatings, grease. Before painting with the color, the substrate is impregnated with the DENAS DEEP PENETRATION primer. The paint is applied with a brush, roller, or spraying in the supplied consistency in 2-3 layers with a minimum of 4 hours between successive coats. The temperature during application and drying of the paint must not fall below +10 °C, with air humidity up to 70%.

Coverage: 

5 - 8 m²/kg for one coat.

Packaging:

Plastic or metal containers weighing 0.7 kg, 2.5 kg, 5 kg, 10 kg, 20 kg.

Safety instructions:

If medical help is needed, have the product packaging or label at hand. Keep out of reach of children. Do not inhale aerosols. Use only outdoors or in well-ventilated areas. Prevent release into the environment. Use protective gloves/protective clothing/protective goggles. IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap. In case of skin irritation or rash: Seek medical attention/treatment. Dispose of contents/container in accordance with local regulations by handing it over to a person authorized for waste disposal or to a location designated by the municipality.

Hazard information:

H317–May cause an allergic skin reaction; H412–Harmful to aquatic life with long lasting effects.

Hazardous substances:

2-octyl-2H-isothiazol-3-one; 2,4,7,9-tetramethyldec-5-yn-4,7-diol

Safety and hygiene:

Follow personal hygiene principles. Ensure ventilation of the workplace. When spraying, use respiratory protection. In case of skin contamination, wash the affected area with water and soap. In case of eye contact, rinse with water. If ingested, rinse mouth with water, do not induce vomiting. If health problems occur, seek medical treatment.

Waste disposal:

Dispose of leftover paint and contaminated packaging as hazardous waste according to applicable regulations. The product retains its useful properties in the original unopened packaging at least until the date indicated on the lid.

PROTECT FROM FROST!

Density:

1.1–1.25 g/cm³; VOC: 0.05 kg/kg; TOC: 0.03 kg/kg; ONL: 30–40 % vol.; Category VŘNH: A/i – single-component coatings with special function.; Highest allowable limit of VOC content (g/l): 140; Max. VOC content in the product in ready-to-use state (g/l): 61.

Product safety warnings (H-phrases)

• EUH211: Warning! Spraying may create hazardous respiratory droplets. Do not inhale aerosols or mists.
• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic life with long lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical help is needed, have the product packaging or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/protective goggles/face shield.
• P333+P313: If skin irritation or rash occurs: Seek medical attention/treatment.
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P391: Collect spillage.
• P501: Dispose of contents/container according to the instructions on the product.