
Het Klasic Color paint tinted dispersion resistant to abrasion paint that we recommend for living and commercial spaces, children's rooms, dining rooms, hallways, offices, and retail areas. Suitable for coating mineral, plaster, and remediation plasters, masonry, concrete panels and monoliths, drywall, cement board, and fiberboard, designated paper wallpapers, fiberglass wallpapers, etc.
Instant application of tinted paint, significant cover ability and spreadability, matte appearance, dry abrasion resistance, excellent vapor permeability, suitable for coating plasters of remediation systems. 16 color shades.
Uses of Het Klasic Color:
For indoor wall and ceiling coatings, lime, lime-cement, gypsum-lime, and gypsum plasters, drywall, cement board, and fiberboard, plasters with acrylic binders, remediation plasters (meets the requirements of WTA CZ directive no. 2-9-04/D, table 4 limiting the use of coatings on remediation plasters from the perspective of vapor permeability), concrete panels and monoliths, designated paper wallpapers, fiberglass wallpapers, etc. Also for application on substrates combining, for example, mineral plasters and drywall. The product meets the requirements for coatings on surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and abrasion with dry materials.
The coated surface must not be in constant contact with water and must not be exposed to condensing humidity. The dry coating can withstand temperatures of around 70 °C for a short time. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.
Coverage of Het Klasic Color:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the layer applied.
Application of Het Klasic Color:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large-area application – spraying AIRLESS, HVLP. When spraying, it is advisable to conduct tests on specific equipment beforehand.
Substrate:
Dry, cohesive, free from dirt and biological contamination (mold, algae), unsalted, grease-free, free from shuttering oils, chemically stable, matured (pH ≤8.5; control can be performed with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be within +5 to +30 °C during application and for 24 hours after application.
Application procedure:
You might need:
Brushes, rollers, sanding paper, covering materials, spatulas, knives, buckets, and trays.
| Species: | ostatní |