Het Klasik paint, 15 + 3 kg

Het Klasik abrasion-resistant paint, interior dispersion high white color. Recommended for living and commercial spaces, children's rooms, hallways, offices, retail spaces.

High whiteness min. 95% MgO, pronounced covering ability, matte appearance, resistance to abrasion when dry, excellent vapor permeability, suitable for coating repair system plasters.

Usage:
For coating mineral, plaster, and repair plasters, masonry, drywall, fiber-cement and wood-fiber boards, concrete panels and monoliths, specially designated paper wallpapers, glass fiber wallpapers, etc.

Shade:
White, tinting can be done with HETCOLOR tinting colors or KOLORKA tinting products (max. in a ratio of 1 : 5 parts of color), or by mixing with the KLASIK COLOR product.

Coverage:
6 – 10 m²/kg in one coat depending on the absorbency and structure of the substrate and the thickness of the applied layer.

Application:
By roller, brush, spraying Airless and HVLP

Application procedure:
1. For slightly absorbent and extremely smooth substrates (drywall, plaster finishes, etc.), the priming coat is done with the penetrating product UP-GRUND; for very absorbent substrates, with the products A-GRUND or AT-GRUND. If the paint is used as a primer, it should be diluted with water from 0.3 l to 0.5 l per 1 kg of paint depending on the application technique used (roller, brush). If the substrate is a non-flaking, slightly absorbent original paint film, priming is not necessary. Layers of old coatings with insufficient adhesion are recommended to be scraped off.
2. After drying the primer, apply 1–2 finishing coats with the paint diluted with a maximum of 0.1 liters of water per 1 kg of paint. For new or significantly differently colored substrates, additional finishing coats may be applied as needed.

You may find covering material, such as paper adhesive tape or covering film, or possibly sanding papers. Don't forget brushes and rollers.