
Het Klasic Color painted tinted dispersion wear-resistant paint that we recommend for living and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces. Suitable for painting mineral, gypsum, and remedial plasters, masonry, concrete panels and monoliths, drywall, fiberboard, and wood fiber boards, paper wallpapers designed for this purpose, fiberglass wallpapers, etc.
Immediate application of tinted paint, high covering ability and spreadability, matte appearance, resistance to wear in dry conditions, excellent vapor permeability, suitable for coating plasters of remedial systems. 16 color shades.
Use of Het Klasic Color:
For indoor coatings of walls and ceilings, lime, lime-cement, gypsum-lime, and gypsum plasters, drywall, fiberboard, and wood fiber boards, plasters with acrylic binders, remedial plasters (meets the requirement of WTA CZ directive no. 2-9-04/D, table 4 limiting the use of covering layers on remedial plasters from the perspective of permeability to water vapor), concrete panels and monoliths, paper wallpapers intended for this purpose, fiberglass wallpapers, etc. Also for application on bases combining, for example, mineral plasters and drywall. The product meets the requirements for coatings on surfaces that may come into indirect and direct incidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard moisture in rooms and resistant to abrasion with dry material.
The painted surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can withstand temperatures around 70 °C for a short time. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.
Coverage of Het Klasic Color::
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Applying Het Klasic Color paint:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large surface application – by AIRLESS spraying, HVLP. When applying by spraying, it is advisable to conduct tests on specific equipment beforehand.
Substrate:
Dry, cohesive, free of dirt and biological infestation (mold, algae), non-salted, non-greasy, free of formwork oils, chemically stable, cured (pH ≤8.5; control can be performed with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must range from +5 to +30 °C during application and for 24 hours after application.
Application procedure:
You might need:
Brushes, small brushes, rollers, abrasives, covering materials, spatulas, knives, buckets, and trays.
| Species: | ostatní |