
Het Klasic Color paint with a tinted dispersion that is abrasion-resistant which we recommend for living and commercial spaces, children's rooms, dining rooms, corridors, offices, sales areas. Suitable for coatings on mineral, plaster, and renovation plasters, masonry, concrete panels and monoliths, drywall, fiber cement and wood fiber boards, specifically designed paper wallpapers, fiberglass wallpapers, etc.
Immediate application of the tinted color, high covering ability and spreadability, matte appearance, resistance to abrasion when dry, excellent vapor permeability, suitable for coatings on renovation system plasters. 16 color shades.
Use of Het Klasic Color:
For internal wall and ceiling coatings, lime, lime-cement, plaster-lime, and gypsum plasters, drywall, fiber cement, and wood fiber boards, plasters with acrylic binding agents, renovation plasters (meets the requirement of WTA CZ directive no. 2-9-04/D, table 4 limiting the use of cover layers on renovation plasters in terms of permeability for water vapor), concrete panels and monoliths, specifically designed paper wallpapers, fiberglass wallpapers, etc. Also suitable for application on substrates with a combination of e.g. mineral plasters and drywall. The product meets the requirements for coatings on surfaces that may come into direct and indirect occasional contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and abrasion by dry materials.
The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can temporarily withstand temperatures of around 70 °C. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, corridors, offices, sales areas, etc.
Yield of Het Klasic Color::
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application of Het Klasic Color:
Recommended application – with painting rollers (perlon, polyacryl, polyamide), brush; small areas - with a brush; large surface application – by spraying AIRLESS, HVLP. When spraying, it is advisable to conduct tests on specific equipment beforehand.
Substrate:
Dry, cohesive, free of dirt and biological infestations (mold, algae), unsoiled, grease-free, free of form oils, chemically stable, mature (pH ≤8.5; control can be done with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be between +5 and +30 °C during application and for 24 hours after application.
Application procedure:
You may need:
Brushes, small brushes, rollers, abrasives, covering material, spatulas, knives, buckets, and trays.
| Species: | ostatní |