Het Klasik Color paint, 0147 gray, 4 kg

Het Klasic Color is a wear-resistant tinted dispersion paint suitable for living rooms, children's rooms, dining rooms, hallways, offices, and retail and commercial spaces. It is suitable for coating plaster, mineral and renovation plasters, brickwork, monoliths, and concrete panels, plasterboard, fiberboard, and cement fiberboards, all types of paper wallpapers, fiberglass wallpapers, etc.

Instantly applicable tinted paint with high covering ability and easy workability. It features a matte appearance, resistance to dry abrasion, and excellent vapor permeability, and is also suitable for renovation system plasters. There are 16 color shades available.

• new collection of 36 shades
• instant application of tinted paint
• perfect workability
• great covering ability and easy spreading
• matte appearance
• resistance to dry abrasion
• excellent vapor permeability
• also suitable for the coating of renovation system plasters

Usage of Het Klasic Color:

For interior wall and ceiling paints, lime, lime-cement, gypsum-lime, and gypsum plasters, plasterboards, cement-bonded fiberboards, acrylic-bonded plasters, renovation plasters (meets the requirements of WTA CZ guideline no. 2-9-04/D, tab. 4 limiting the use of covering layers on renovation plasters concerning permeability for water vapor), concrete panels, and monoliths, designated paper wallpapers, fiberglass wallpapers, etc. Also suitable for application on substrates with a combination of, for example, mineral plasters and plasterboard. The product meets the requirements for coatings on surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and resistant to abrasion by dry materials.

The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can temporarily withstand temperatures of around 70 °C. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.

Coverage of Het Klasic Color paint::
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.

Application of Het Klasic Color paint:
Recommended application – using paint rollers (perlon, polyacrylic, polyamide), brush; for small areas - brush; large surface application – spraying AIRLESS, HVLP. When spraying, it is advisable to conduct tests on the specific equipment beforehand.

Substrate:
Dry, cohesive, free of dirt and biological infestation (mold, algae), salt-free, grease-free, free of formwork oils, chemically stable, matured (pH ≤8.5; control can be performed with a pH tester).

Application temperature:
The temperature of the material, environment, and substrate must range from +5 to +30 °C during application and for 24 hours after application.

Application procedure:

1. The priming coat is applied with paint diluted with a maximum of 0.3 liters of water per 1 kg of paint, or with penetration product A-GRUND or AT-GRUND, in the case of plasterboard and other low-absorbent or extremely smooth substrates with UP-GRUND. If the substrate is a non-destructive, low-absorbent original coating film, the priming coat is not necessary. Layers of old coatings with insufficient adhesion are recommended to be scraped off.
2. After the priming coat has dried, apply 1–2 covering coats with paint diluted with a maximum of 0.1 liters of water per 1 kg of paint. For new or significantly color-different substrates, more covering coats may be applied as needed.

You might find helpful:
Brushes, paint rollers, abrasives, covering materials, spatulas, knives, buckets, and trays.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have container or label at hand.
• P102: Keep out of reach of children.
• P501: Dispose of contents/container in accordance with product instructions.