
Hetcolor acrylic tinting paint is used for coloring facade and interior dispersion and traditional coatings, or for direct application. It is a matte dispersion tinting paint intended for both exterior and interior use. It is suitable for tinting water-based traditional and dispersion paints for walls and ceilings or for direct application on exterior and interior lime and lime-cement plasters, acrylic plasters, masonry, etc. It is also suitable for decorative coatings of vertical concrete surfaces. In interiors and in places protected from rain, it can be used for decorative coatings of particleboard, fiberboard, drywall, and gypsum fiberboards, gypsum and lime based plasters, wallpapers, paper, etc.
The product complies with surfaces that may come into indirect or accidental direct contact with food. After drying, the coating briefly withstands temperatures around 70 °C. However, prolonged exposure to high temperatures can adversely affect technical properties, color fastness, and resistance to weather influences. Full shades with a light reflection index value of HBW (Y) lower than 30 are not suitable for application on contact insulation systems. The treated surface must not be in permanent contact with water. The product cannot be used for tinting lime, silicate, and solvent-based paints or for coloring cement mixtures.
Suitable for both indoor and outdoor use and also for direct application. It offers a matte appearance, resistance to wet abrasion, long-term color fastness, and high covering ability.
Shades:
white and 21 color shades, where individual shades can be mixed with each other
Coverage:
6 - 10 m² /kg in one layer depending on the absorbency, structure of the substrate, and thickness of the applied layer
Procedure for tinting:
First, shake the contents of the package thoroughly. In the chosen mixing ratio, the tinting paint is gradually mixed into the white coating material. During mixing, care should be taken to avoid foaming of the paint. Only after tinting the chosen shade should the paint be diluted with water according to the instructions of the manufacturer of the tinted coating material, if necessary.
When tinting colors from other manufacturers, it is recommended to first test compatibility with the specific coating material.
| Species: | ostatní |