
Hetcolor acrylic tinting paint is intended for tinting facade and interior dispersion and traditional coatings, or it can be applied directly. It is a dispersion matte tinting paint for outdoor and indoor use. You can use it for tinting water-based coatings on walls and ceilings (both dispersion and traditional) or for standalone application on masonry, lime-cement, lime, and acrylic plasters in both interior and exterior. It is also suitable for decorative coatings of vertical surfaces made of concrete. In interiors and on substrates protected from rain, it is applicable for decorative coatings of drywall, fiberboard, particleboard, and wood fiber boards, gypsum or plaster-lime plasters, wallpapers, paper, etc.
The product meets the requirements for surfaces that may come into indirect or accidental direct contact with food. The dry coating can withstand short-term temperature loads of around 70 °C. However, prolonged exposure to high temperatures may negatively affect technical parameters, color fastness, and resistance to weather effects. Full shades with an HBW (Y) light reflectance index of less than 30 are not suitable for coatings of contact insulation systems. The painted area should not remain in permanent contact with water. The color cannot be used for tinting lime, silicate, or solvent-based coatings, nor for coloring mixtures with cement.
Designed for both interior and exterior environments, also suitable for direct application. Matte appearance, resistance to wet abrasion, color stability over time, and high coverage ability.
Shades:
white and 21 color shades that can be mixed together
Yield:
6 - 10 m² /kg for one layer depending on the thickness of the application, absorbency, and texture of the substrate
Tinting procedure:
First, shake the contents of the package thoroughly. In the chosen mixing ratio, the tinting paint is gradually mixed into the white coating material. Care should be taken during mixing to avoid foaming of the paint. Only after tinting the chosen shade, if needed, the paint should be diluted with water according to the manufacturer’s instructions for the tinted coating material.
When tinting colors from other manufacturers, it is recommended to first test compatibility with the specific coating material.
| Species: | ostatní |