
Paint with a tonal dispersion resistant to abrasion Het Klasik Color is suitable for living and commercial spaces, children's rooms, dining rooms, hallways, offices, and stores. It is recommended for coatings of plaster, mineral and repair plasters, masonry, concrete panels and monoliths, drywall, fiberboard, and wood-fiber boards, as well as for designated paper wallpapers, wallpapers made of fiberglass, etc.
The tonal paint is ready for immediate use, with high covering ability and spreadability, matte appearance, resistance to abrasion when dry, excellent vapor permeability, suitable for coatings of plasters in renovation systems. It is available in 16 color shades.
Use of Het Klasik Color:
For interior wall and ceiling coatings, lime, lime-cement, gypsum-lime and gypsum plaster, drywall, fiberboard, and wood-fiber boards, plasters with acrylic binders, renovation plasters (meets the requirement of WTA CZ directive no. 2-9-04/D, table 4 limiting the use of covering layers on renovation plasters in terms of vapor permeability), concrete panels and monoliths, designated paper wallpapers, fiberglass wallpapers, etc. It is also suitable for application on substrates with combinations of mineral plasters and drywall. The product meets the requirements for coatings of surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and abrasion with dry cloths.
The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating temporarily withstands temperatures around 70 °C. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, sales areas, etc.
Yield of the paint Het Klasik Color:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application of Het Klasik Color:
Recommended application – with paint rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large surface application – spraying AIRLESS, HVLP. It is advisable to conduct tests on specific equipment prior to spraying application.
Substrate:
Dry, cohesive, free from dirt and biological attack (mold, algae), non-saline, non-greasy, free from shuttering oils, chemically stable, mature (pH ≤8.5; control can be performed with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be between +5 and +30 °C during application and for 24 hours after application.
Application procedure:
You might need:
Rollers, brushes, small brushes, covering material, abrasives, spatulas, knives, trays, and buckets.
| Species: | ostatní |