REMAL Termokomfort thermal insulation paint for walls, 4 kg

REMAL Termokomfort is a paint with anti-condensation and thermal insulation properties. It is suitable for painting commercial and residential spaces.

It is used for painting internal ceilings and walls on plasterboard, plasters, and other substrates. It is characterized by easy application.

Properties of REMAL Termokomfort thermal insulation paint:

• internal thermal insulation coating for walls
• paint for walls shields thermal bridges in the masonry
• anti-condensation effect
• excellent coverage

Yield of thermal insulation paint:

Up to 3 m²/kg in one layer.

Tinting of thermal insulation paint:

The tinting can be done with common tinting pastes, such as REMAL LIQUID TINTING PAINT or REMAKOL.

Application procedure for thermal insulation paint:

Before painting, remove layers of old and non-adherent coatings. Treat absorbent substrates with REMAL UNIVERSAL PRIMER, and non-cohesive and crumbling substrates with REMAL DEEP PRIMER. This will remove dust from the surface, strengthen it, unify absorbency, and ensure adhesion of the coating. The drying time is 4 hours. Smooth out unevenness on the wall using REMAL PUTTY. The paint is not diluted for application. If necessary, a maximum of 0.1 l of water can be added to 1 kg of paint. Mix thoroughly. Apply with a roller or brush in 1 - 2 layers; apply the next layer after the previous one has dried, at least after 4 hours. The optimal temperature for painting is between 15 and 25 °C. The temperature of the substrate and the environment must not drop below 5 °C during application. For large areas, use product from the same batch, mix different batches together before use. Clean any soiled areas immediately with water; dried paint is difficult to remove.

You may find protective material useful, such as paper adhesive tape or protective film. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Instructions for safe handling (P-statements)

• P273: Avoid release to the environment.
• P501: Dispose of contents/container according to product instructions.