
Hetcolor acrylic tinting color is used for coloring facade and interior dispersion and classic paints, or it can be applied directly. It is a matte dispersion paint suitable for both indoor and outdoor environments. You can use it for tinting water-based dispersion and classic wall and ceiling paints, or for direct application on internal and external lime and lime-cement plasters, acrylic plasters, masonry, etc. It is also suitable for decorative coatings of vertical surfaces made of concrete. In interiors and on substrates protected from rain, it can also be used for decorative coating of drywall, fiberboard, wood fiberboard or particleboard, plaster or plaster-lime coats, paper or wallpaper.
The product meets the requirements for coatings on surfaces that may have incidental direct or indirect contact with food. The cured coating can withstand short-term temperature loads of around 70 °C. However, prolonged exposure to higher temperatures may adversely affect technical properties, weather resistance, and color stability. Solid colors with a light reflectance index HBW (Y) of less than 30 are not suitable for coatings on contact insulation systems. The treated substrate must not remain in permanent contact with water. The coating cannot be used for tinting solvent-based, silicate, or lime materials and is not intended for coloring cement mixtures.
Suitable for both interior and exterior, direct application possible. Matte surface, abrasion resistance when wet, long-lasting color stability, high covering capacity.
Shades:
white and 21 color shades, where individual shades can be mixed together
Coverage:
6 - 10 m² /kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer
Procedure for tinting:
First, shake the contents of the packaging thoroughly. In the chosen mixing ratio, the tinting color is gradually mixed into the white coating material. When mixing, care should be taken to avoid foaming the paint. Only after tinting the chosen shade, if necessary, the paint is diluted with water according to the instructions of the tinted coating manufacturer's recommendations.
When tinting colors from other manufacturers, it is recommended to first test compatibility with the specific coating material.
| Species: | ostatní |