
Het Klasic Color represents a painted toned dispersion abrasion-resistant color, which suits living and commercial interiors, children's rooms, dining rooms, hallways, offices, and stores. It is intended for coatings of mineral, gypsum, and renovation plasters, masonry, concrete panels and monoliths, drywall, fiberboard, and wood fiber board, suitable paper wallpapers, or fiberglass wallpapers, etc.
The paint is ready for immediate application, offers high coverage and easy spreadability, a matte appearance, dry abrasion resistance, and excellent vapor permeability. It can also be used on plasters of renovation systems. You can choose from 16 color shades.
Use of Het Klasic Color:
For interior wall and ceiling coatings, lime, lime-cement, gypsum, and gypsum plaster, drywall, fiberboard, and wood fiber boards, plaster with acrylic binder, renovation plasters (meets the requirement of directive WTA CZ no. 2-9-04/D, table 4 limiting the use of covering layers on renovation plasters in terms of permeability for water vapor), concrete panels and monoliths, designated paper wallpapers, fiberglass wallpapers, etc. Also for application on substrates combining, for example, mineral plasters and drywall. The product meets the requirements for painting surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor-permeable surface that is resistant to standard humidity in rooms and resistant to abrasion by dry materials.
The painted surface must not be in permanent contact with water and must not be exposed to condensing moisture. The dried coating can temporarily withstand temperatures around 70 °C. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, sales areas, etc.
Coverage of paint Het Klasic Color:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application of Het Klasic Color paint:
Recommended application - with paint rollers (polyester, polyacrylic, polyamide), brush; small areas - with a brush; large-scale application - by spraying AIRLESS, HVLP. When spraying, it is advisable to conduct tests on specific equipment beforehand.
Substrate:
Dry, cohesive, free of dirt and biological attack (mold, algae), unsalted, non-greasy, free of formwork oils, chemically stable, matured (pH ≤8.5; can be checked with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be between +5 and +30 °C during application and for 24 hours after application.
Application procedure:
You might need:
Brushes, small brushes, paint rollers, sanding materials, covering supplies, spatulas, knives, buckets, and trays.
| Species: | ostatní |