
Het Klasic Color paint toned dispersion abrasion resistant paint that we recommend for living and commercial spaces, children's rooms, dining rooms, hallways, offices, and retail spaces. Suitable for coatings on mineral, plaster, and renovation plasters, masonry, concrete panels and monoliths, drywall, fiberboard and wood-fiber boards, designated paper wallpapers, fiberglass wallpapers, etc.
Immediate application of toned paint, distinct covering ability and spreadability, matte appearance, resistance to abrasion in dry conditions, excellent vapor permeability, suitable for coatings on renovation system plasters. 16 color shades.
Use of Het Klasic Color:
For indoor wall and ceiling coatings, lime, lime-cement, plaster-lime, and plastering, drywall, fiberboard and wood-fiber boards, acrylic binder plasters, renovation plasters (meets the requirements of WTA CZ directive no. 2-9-04/D, table 4 limiting the use of covering layers on renovation plasters in terms of vapor permeability), concrete panels and monoliths, designated paper wallpapers, fiberglass wallpapers, etc. Also for application on substrates with a combination of, for example, mineral plasters and drywall. The product meets the requirements for coatings on surfaces that may come into indirect and direct accidental contact with food. The coating creates a matte, highly vapor permeable surface that is resistant to standard humidity in rooms and resistant to abrasion with dry substances.
The painted surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating will withstand temperatures around 70 °C for a short time. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.
Yield of paint Het Klasic Color:
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application of Het Klasic Color:
Recommended application – with painter's rollers (polyester, polyacrylic, polyamide), brush; small areas - with a brush; large-area application – by AIRLESS spraying, HVLP. When spraying, it is advisable to perform tests on the specific equipment beforehand.
Substrate:
Dry, cohesive, free of impurities and biological contamination (mold, algae), not salty, grease-free, free of formwork oils, chemically stable, matured (pH ≤8.5; control can be performed with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be between +5 to +30 °C during application and for 24 hours after application.
Application procedure:
Helpful items:
Brushes, small brushes, rollers, abrasives, covering materials, spatulas, knives, buckets, and trays.
| Species: | ostatní |