
Dispersion toned abrasion-resistant paint Het Klasic Color is recommended for residential and commercial interiors, children's rooms, dining rooms, hallways, office and retail spaces. It is suitable for application on mineral, plaster or renovation plasters, masonry, concrete panels and monoliths, plasterboard, fiberboard, and wood-fiber boards, designated paper wallpapers, glass fabric wallpapers, and similar surfaces.
The toned paint is ready for immediate use, with high coverage and spreadability, a matte finish, resistance to dry abrasion, excellent vapor permeability, and suitability for painting renovation system plasters. Available in 16 color shades.
Use of Het Klasic Color:
For indoor painting of walls and ceilings, lime, lime-cement, gypsum-lime, and gypsum plasters, plasterboard, fiberboards, and wood-fiber boards, plasters with acrylic binders, renovation plasters (meets the requirements of WTA CZ directive no. 2-9-04/D, table 4 limiting the use of cover layers on renovation plasters in terms of vapor permeability), concrete panels, and monoliths, designated paper wallpapers, glass fiber wallpapers, etc. It is also applicable to substrates with a combination of, for example, mineral plasters and plasterboard. The product meets the requirements for painting surfaces that may come into indirect and direct incidental contact with food. The coating creates a matte, highly vapor-permeable surface, which is resistant to standard humidity in rooms and resistant to abrasion by dry materials.
The coated surface must not be in constant contact with water and must not be exposed to condensing moisture. The dried coating can temporarily withstand temperatures around 70 °C. The paint is suitable for painting residential and commercial spaces, children's rooms, dining rooms, hallways, offices, retail spaces, etc.
Color coverage of Het Klasic Color::
6 – 10 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application of Het Klasic Color:
Recommended application – with painting rollers (perlon, polyacrylic, polyamide), brush; small areas - with a brush; large-area application – by AIRLESS or HVLP spraying. When spraying, it is advisable to conduct tests on specific equipment beforehand.
Substrate:
Dry, cohesive, free of dirt and biological contamination (mold, algae), non-salty, non-greasy, free of formwork oils, chemically stable, mature (pH ≤8.5; control can be done with a pH tester).
Application temperature:
The temperature of the material, environment, and substrate must be between +5 and +30 °C during application and for 24 hours afterwards.
Application procedure:
You might find useful:
Rollers, brushes, paint brushes, sandpaper, covering materials, knives, spatulas, trays, and buckets.
| Color: | Blue |
| Species: | ostatní |