DENAS NA KOV-ZÁKLAD anti-corrosive paint for metal, 0110 gray, 700 g

DENAS NA KOV-ZÁKLAD basic anti-corrosive protection for iron, aluminum, copper, galvanized steel. DENAS basic anti-corrosive paint for metal (formerly DENAS ANTIKOR) is a water-dilutable paint for new and renovation coatings with increased corrosion protection. The paint is suitable for coatings of steel, iron, aluminum, and freshly galvanized structures and sheets, metal roofs, their plumbing elements, railings, fences, poles, and other metal products located in exterior and interior. It is also suitable for fresh copper. It exhibits very quick drying, excellent adhesion on metal substrates, opacity, and workability.

• for interior and exterior
• on adherent rust
• excellent flow
• holds perfectly
• mix and apply
• for metals, fresh galvanized, light metals, gutters, railings

The paint has excellent anti-corrosive properties, adhesion to metal substrates, chemical resistance, and long durability. The paint can also be used on partially corroded surfaces. For the top coat, we recommend using DENAS UNIVERZÁL.

General composition is a mixture of acrylic dispersion, pigments, fillers, and special additives.

Coverage:
6 - 8 m² / kg for one layer

Previous commercial designation:
Denas Antikor basic anti-corrosive paint for metal

Safety instructions:

Prevent release into the environment. Do not inhale aerosols. Use only outdoors or in well-ventilated areas. Dispose of contents/container in accordance with local regulations by handing it to an authorized waste disposal person or at a site designated by the municipality.

Hazard data:

H412 – Harmful to aquatic life with long-lasting effects.

Safety and hygiene:

Follow personal hygiene principles. In case of skin contact, wash the affected area with water and soap. If in eyes, rinse with water. If swallowed, rinse mouth with water, do not induce vomiting. In case of health issues, seek medical attention.

Waste disposal:

Dispose of leftover paint and contaminated packaging as hazardous waste in accordance with applicable regulations. The product retains its useful properties in the original unopened container until at least the date indicated on the cap.

Density:

1.1–1.3 g/cm³ VOC: 0.03 kg/kg; TOC: 0.02 kg/kg ONL: 35–45 % vol. Category VŘNH: A/i – one-component coatings with special function. The highest allowable VOC content: 140 g/l. Max. VOC content in the product in the state ready for use: 39 g/l.

Product safety warnings (H-statements)

• EUH211: Warning! Spraying may create hazardous respirable droplets. Do not inhale aerosols or mist.
• H412: Harmful to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P273: Prevent release into the environment.
• P501: Dispose of contents/container according to the instructions on the product.