
Meets the requirements of the standard ČSN EN ISO 1504-2: Product for surface protection - coatings. Declaration of properties No. 003.
Composition (general):
Mixture of acrylic dispersion, pigments, fillers, and special additives
Procedure:
The substrate must be dry, free from dirt and non-adhering layers of the substrate, cement milk, and any previous coatings, and grease. Before painting, the substrate is soaked with the penetrating agent DENAS DEEP PENETRATION or paint diluted with water in the ratio of 1:5. The paint is applied with a brush, roller, or sprayed in the supplied consistency in 2-3 layers with a minimum interval of 4 hours between individual coats. The temperature during application and drying of the paint must not fall below +10 °C, air humidity up to 70%. Temperature conditions must be maintained throughout the drying time of the coating. The drying speed depends on temperature, humidity, air flow, and applied thickness.
Coverage:
5 - 8 m²/kg for one coat.
Packaging:
Plastic or metal containers weighing 2.5, 5, 10, and 20 kg.
If medical help is needed, keep the packaging or product label handy. Keep out of reach of children. Do not inhale aerosols. Use only outdoors or in well-ventilated areas. Prevent release into the environment. Use protective gloves/protective clothing/protective eyewear. ON CONTACT WITH SKIN: Wash with plenty of water and soap. If skin irritation or rash occurs: Seek medical help/treatment. Dispose of contents/container in accordance with local regulations by handing it to a waste disposal permit holder or at a location designated by the municipality.
Hazard information:
H317–May cause an allergic skin reaction; H412–Harmful to aquatic organisms, with long-lasting effects.Hazardous substances:
2-octyltetrahydroisothiazol-3-one; 2,4,7,9-tetramethyldec-5-in-4,7-diol
Safety and hygiene:
Follow personal hygiene principles. Ensure ventilation of the workplace. When spraying, use respiratory protection. If skin is contaminated, wash the affected area with water and soap. If in eyes, rinse with plenty of water. If swallowed, rinse mouth with water, do not induce vomiting. In case of health problems, seek medical treatment.
Waste disposal:
Dispose of leftover paints and contaminated containers as hazardous waste in accordance with applicable regulations. The product retains its utility properties in the original unopened container for at least until the date indicated on the lid/cap.
PROTECT FROM FROST!
Density:
1.1–1.25 g/cm3; VOC: 0.05 kg/kg; TOC: 0.03 kg/kg; ONL: 30–40 % vol.; Category VŘNH: A/i – single-component coatings with special function.; Maximum permissible value of VOC content (g/l): 140; Max. VOC content in the product in the ready-to-use state (g/l): 61.
| Species: | ostatní |
| Corrosive/Caustic: | Corrosive/Caustic |
Korozivní/žíravé
Nebezpečí
Může být korozivní pro kovy. Způsobuje těžké poleptání kůže a poškození očí.
Varování. Pokyny pro bezpečné zacházení
Nevdechujte prach/dým/plyn/mlhu/páry/aerosoly. Po manipulaci důkladně omyjte… Používejte ochranné rukavice / ochranný oděv / ochranné brýle / obličejový štít. Skladujte uzamčené. Uchovávejte pouze v původním obalu. Uchovávejte mimo dosah dětí.