REMAL Expert Bright White Wall Paint, 1 kg

REMAL Expert is velvety matte and bright white paint with an extremely high whiteness of 96%. This interior paint has excellent hiding power and is also highly breathable, suitable for renovation plasters.

The REMAL Expert paint is used for painting plasters, concrete, drywall, cement boards, chipboard, and renovation plasters in interiors.

The REMAL Expert wall paint exhibits resistance to abrasion when wet and is a washable paint – measured according to ČSN EN ISO 11998 – class 5 (classification according to EN 13300).

REMAL Expert wall paint is designed for extremely bright coatings of residential and commercial spaces - a representative bright white wall paint. The paint contains optical brighteners that enhance the extremely high whiteness of the paint coating.

Disperse white wall paint REMAL Expert is extremely white,easy to process, has a velvety matte appearance, is breathable, vapor-permeable, highly covering, non-toxic and environmentally friendly.

Paint with pleasure - free painting cookbook

Properties of the REMAL Expert white wall paint:

• premium paint coating with extreme whiteness of 96%
• extremely white,contains optical brighteners
• velvety matte appearance
• traditional Czech white wall paint REMAL
• for coatings of residential and commercial spaces
• suitable for walls, ceilings, plasters, concrete, or drywall in interiors
• also suitable for renovation masonry
• highly breathable wall paint
• vapor-permeable wall paint
• high opacity
• easy to process
• water-based natural paint
• suitable for children's rooms
• non-toxic
• tintable paint
• easily washable wall paint
• abrasion resistance when wet class 5
• 1 kg packaging of paint is sufficient for up to 11 m² in one coat

Technical properties of the REMAL Expert wall paint:

• coverage 11 m²/1 kg in one coat
• tinting is possible with standard REMAL tinting pastes, liquid tinting paint or REMAKOL, or at our stores
• paint for indoor plasters on walls and ceilings, drywall, and other substrates
• water-based wall paint
• the paint can be applied with a roller, brush, or spraying (including AIRLESS)
• whiteness of the paint 96%
• resistance to abrasion when wet after 28 days - class 5. (measured according to ČSN EN ISO 11998, classified according to EN 13300)
• viscosity 4000 - 6000 mPas (Brookfield HB DV 2+ 4/100)
• content of non-volatile substances min. 63%
• pH 8.5 - 10

Procedure for the REMAL Expert paint:

Before painting with REMAL Expert, remove layers of old and non-adhering paints. Absorbent substrates should be treated with REMAL universal primer, non-cohesive and crumbling substrates should be treated with REMAL deep primer. This will remove dust from the surface, strengthen it, unify absorbency, and ensure adhesion of the paint coating. The drying time is 4 hours. Level irregularities on the wall with REMAL putty. Dilute the paint at a ratio of max. 0.2 l of water per 1 kg of paint. Then mix thoroughly.

Apply the paint with a brush, roller, or by spraying in 2 coats, apply the next coat of paint after the previous one has dried, at least after 4 hours. The optimal temperature for painting with the paint is 15 to 25 °C. The temperature of the substrate and the environment must not fall below 5 °C during the application of the wall paint. Use product from one batch for completed areas, mix different batches together before use.

Handling of REMAL Expert wall paint:

When working, observe basic hygiene rules. The product is not intended for coatings that come into direct contact with food, feed, drinking water, or for painting children's toys and children's furniture. Keep out of reach of children. If you feel unwell, seek medical attention.

The product is treated with a biocide. It contains 1,3,5-tris(2-hydroxyethyl)hexahydro-1,3,5-triazin, 1,2-benzothiazol-3(2H)-on+, octhilinone (ISO), reaction mixture: 5-chloro-2-methylisothiazol-3(2H)-on [ES No. 247-500-7] and 2-methylisothiazol-3(2H)-on [ES No. 220-239-6] (3:1). May cause an allergic reaction.

You might find useful

covering material, such as paper masking tape or covering film, possibly sanding papers. Don't forget brushes, rollers, spatulas, and scrapers.

Washability of the paint in practice is addressed by the standard ABRASION RESISTANCE WHEN WET ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining the resistance to abrasion when wet and for determining the washability of the paint. Regarding the cleanability of coatings, it only provides the testing method itself but does not specify the contaminating substances. After drying and conditioning, the painted sample is weighed and subjected to cleaning cycles when wet in a test abrasion (cleaning) device. From the weight loss, the average value of the loss of coating thickness is calculated. To determine cleanability, contaminants are applied to equally prepared samples. Specified contaminants are left in contact with the coating film for the prescribed time. The painted, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminating substance has been removed and whether the coating is resistant to abrasion when wet.

For assessment, 5 classes are used - class 1 is the best – class 5 is the worst. Grading like in school.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.