DENAS NA KOV-ZÁKLAD anticorrosive paint for metal, 0840 reddish-brown, 700 g

DENAS NA KOV-ZÁKLAD basic anticorrosive protection for iron, aluminum, copper, galvanized steel. DENAS basic anticorrosive paint for metal (formerly DENAS ANTIKOR) is a water-dilutable paint for new and renovation coatings with enhanced corrosion protection. The paint is suitable for coatings of steel, iron, aluminum, and freshly galvanized structures and sheets, metal roofs, their plumbing elements, railings, fences, poles, and other metal products located in both exterior and interior. It is also suitable for fresh copper. It shows very fast drying, excellent adhesion on metal substrates, coverage, and workability.

• for interior and exterior
• on cohesive rust
• excellent coverage
• holds perfectly
• mix and apply
• on metals, fresh galvanization, light metals, gutters, railings

The paint has excellent anticorrosive properties, adhesion to metal substrates, chemical resistance, and long-lasting durability. The paint can also be used on partially corroded surfaces. As a topcoat, we recommend using DENAS UNIVERZÁL.

General composition: a mixture of acrylic dispersion, pigments, fillers, and special additives.

Coverage:
6 - 8 m² / kg per layer

Previous commercial designation:
Denas Antikor basic anticorrosive paint for metal

Safety instructions:

Prevent release into the environment. Avoid inhaling aerosols. Use only outdoors or in well-ventilated areas. Dispose of contents/container in accordance with local regulations, handing it over to a person authorized for waste disposal or at a designated municipal location.

Hazard information:

H412 – Harmful to aquatic organisms, with long-lasting effects.

Safety and hygiene:

Follow personal hygiene principles. In case of skin contact, wash the affected area with water and soap. In case of contact with eyes, rinse with plenty of water. If swallowed, rinse mouth with water, do not induce vomiting. In case of health issues, seek medical attention.

Waste disposal:

Dispose of leftover paint and contaminated containers as hazardous waste in accordance with applicable regulations. The product retains its usable properties in its original unopened container at least until the date indicated on the lid.

Density:

1.1–1.3 g/cm³ VOC: 0.03 kg/kg; TOC: 0.02 kg/kg ONL: 35–45 % vol. Category VFRN: A/i – single-component coatings with special function. The maximum permissible VOC content: 140 g/l. Maximum VOC content in the product in ready-to-use condition: 39 g/l.

Product safety warnings (H-statements)

• EUH211: Warning! Spraying may produce hazardous respirable droplets.Avoid inhaling aerosols ormist.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Safety handling instructions (P-statements)

• P273: Prevent release into the environment.
• P501: Dispose of contents/container according to the instructions on the product.