DENAS METAL PAINT 2in1 anti-corrosive fast-drying paint, 0566 fence green, 700 g

DENAS METAL 2in1 is a self-priming, semi-matte, anti-corrosive, water-based paint designed for the protection of all metal substrates. The coatings provide anti-corrosive protection throughout the thickness of the paint film, high resistance to weathering, UV stability. Metal paint DENAS 2in1 is ideal for surface treatments of roofs, metal constructions, sheet metal elements, fences, gates, window sills, masts, railings, and cast iron products. It perfectly protects steel, iron, freshly galvanized, aluminum, and copper surfaces located in exterior and interior environments. The coatings dry very quickly, adhere excellently to metal substrates, provide high coverage, have perfect flow, and are easy to apply.

Properties of DENAS metal paint:

• for the protection of all metal substrates
• high resistance to weathering, UV stability
• self-priming metal paint
• semi-matte
• anti-corrosive metal paint
• water-based metal paint
• dries very quickly
• highly covering
• very good flow

Application procedure for DENAS metal paint:

The substrate must be dry and free of all dirt, grease, and residues of old, non-adherent coatings. The paint is supplied in a consistency suitable for application with a brush or roller. When spraying, it can be diluted with 5% water. The paint is applied in 2-3 coats with a minimum of 4 hours between each coat. The minimum temperature for application and drying of the coating is +10 °C and relative humidity up to 70%.

Metal paint coverage:

Theoretical coverage is 6-8 m²/kg at an optimal thickness of 80 μm per coat.

Metal paint composition:

A mixture of acrylic dispersion, pigments, fillers, and special additives.

Packaging of metal paint:

Plastic or metal containers weighing 0.7 kg, 2.5 kg, 10 kg, 20 kg.

Safety and hygiene for DENAS metal paint:

Observe personal hygiene principles. Ensure ventilation of the workspace. When applying by spraying, use respiratory protection. If skin contact occurs, wash the affected area with water and soap. In case of eye contact, rinse with water. If ingested, rinse the mouth with water, do not induce vomiting. If health problems occur, seek medical attention.

Hazard information:

H 412 Harmful to aquatic organisms, with long-lasting effects

Waste disposal:

Dispose of paint residues and contaminated containers as hazardous waste in accordance with applicable regulations. The product retains its utility properties in the original unopened container for at least until the date indicated on the lid.

Density:

1.1–1.35 g/cm³; VOC: 0.02–0.03 kg/kg; TOC: 0.01–0.02 kg/kg; ONL: 35–45 % vol.; Category VŘNH: A/i – single-component coatings with a special function.; Maximum permissible VOC content: 140 g/l.; Max. VOC content in the product in ready-to-use state: 47 g/l.

Product safety warnings (H-phrases)

• EUH211: Warning! Spraying may create hazardous respirable droplets. Do not breathe aerosols or mist.
• H412: Harmful to aquatic organisms, with long-lasting effects.

Safety handling instructions (P-phrases)

• P273: Avoid release to the environment.
• P501: Dispose of contents/container in accordance with the instructions on the product.