DENAS WATER-REPELLENT IMPREGNATION, 1 kg

DENAS WATER-REPELLENT IMPREGNATION is a water-repellent saturating agent designed to protect porous materials from water penetration. Suitable substrates include plasters, concrete, bricks, fired and concrete roofing materials, cement particleboard and fiber-cement materials, natural stone, which enhances its natural appearance, and fresh concrete. It significantly reduces the absorbency and soiling of the substrate, increases water repellency and frost resistance. It is easy to process, does not change the appearance and color of the substrate, and is vapor-permeable.

Properties of DENAS water-repellent impregnation:

• water-repellent coating
• repels water
• limits the absorbency of the substrate
• reduces soiling of the substrate
• does not increase the diffusion resistance of the treated material
• characterized by long durability, indoors and outdoors
• does not change the color and appearance of the substrate
• is not washed out by cleaning and disinfecting agents

Meets the requirements of the ČSN EN ISO 1504-2 standard: Product for surface protection - water-repellent impregnation. Declaration of properties no. 011.

Application procedure:

The agent is diluted in a ratio of 1:1 with water; before dilution, the concentrate must be thoroughly mixed. After dilution, it is applied to clean and dry substrates preferably with a brush or roller in at least 2 layers. The second and subsequent layers are applied before the previous layer is completely dry. All material must be absorbed into the substrate; it must not run down the walls or form puddles on horizontal substrates.

Composition (general):

A mixture based on polysiloxanes and special additives.

Shades:

Transparent lacquer.

Packaging:

Plastic containers with a capacity of 1 kg, 3 kg.

Yield:

10–20 m²/kg

Safety handling instructions

If medical assistance is needed, keep the product container or label handy. Keep out of reach of children. Do not inhale aerosols. Use only outdoors or in well-ventilated areas. After handling, wash the skin thoroughly. Use protective gloves/protective clothing/protective goggles/face shield. IN CASE OF SKIN CONTACT: Wash with plenty of water and soap. If skin irritation occurs: Seek medical attention/treatment. Dispose of contents/container in accordance with local regulations by handing over to a person authorized to dispose of waste or to a location designated by the municipality.

Hazard data:

H315 – Causes skin irritation.

Safety and hygiene:

Practice personal hygiene principles. In case of skin contact, wash the affected area with water and soap. In case of eye contact, rinse with plenty of water and seek medical treatment. If ingested, rinse mouth with water, do not induce vomiting, and seek medical attention.

Disposal of waste:

Dispose of leftover product and contaminated packaging as hazardous waste in accordance with applicable regulations. The product retains its useful properties in the original unopened container for at least until the date indicated on the lid.

Density:

1.0 g/cm³; ONL: 20% vol.; Category VŘNH: A/h—penetrating coatings; Highest permissible VOC content (g/l): 30; Max. VOC content in the product in ready-to-use state (g/l): does not contain.

Product safety warning (H-statements)

• H315: Causes skin irritation.

Safety handling instructions (P-statements)

• P101: If medical assistance is needed, keep the product container or label handy.
• P102: Keep out of reach of children.
• P264: After handling, thoroughly wash all exposed parts of the body, such as hands
• P280: Wear protective gloves/protective clothing/protective goggles/face shield.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap
• P321: Seek specialized treatment (see ... on the label).