Bilak A 0000 gloss water-based wood lacquer, transparent, 0.7 kg

BILAK A represents a modern, water-based transparent lacquer with versatile applications. It is used for glazing as well as creating cohesive protective films, whether clear or tinted in the desired shade. It is suitable for painting wooden, fiberboard, and chipboard panels and cladding, constructions or elements made of solid wood and cork floors, both indoors and outdoors. Due to its versatile properties, the lacquer is also suitable for dust-free treatment and strengthening of concrete floors.

Especially for professional purposes, the lacquer is also supplied in the "thick-layer glaze" modification, which allows achieving the required thickness of the protective layer with a minimal number of coats, including protection of the substrate from damage caused by UV radiation. At the same time, this variant optimizes other properties, such as vapor permeability and re-coatability, making the lacquer advantageous for finishing regular wooden furniture, including garden furniture. BILAK A is not suitable for environments with permanent condensation of water vapor or for creating coatings under water. Please consult special applications with the manufacturer.

Coverage:
6 -8 m² /kg in one layer depending on the structure and porosity of the substrate. Glazing coatings 10 - 18 m2/kg of lacquer.

Dilution:
The lacquer is optimally diluted from the factory for standard applications. It can be diluted with water to the optimal processability as required by the user.

Application:
BILAK A is applied using a brush, roller, or spray. Absorbent substrates, including wood, should be treated biocidally first and well impregnated with a suitable penetrating agent ... e.g., BILEP F. (Suitable fungicidal agents ... PREGNOLIT D - remediation, BOCHEMIT QB, PREGNOLIT UNI, LIGNOFIX Eco, ... ) Impregnation with lacquer diluted in a 1:2 ratio with water (lacquer : water) is possible but less suitable. The surface of coniferous wood with a high resin content (especially pine) should first be freed from these resins, preferably using a mixture of available solvents (non-polar x polar) ... e.g.: technical xylene (S6005) + ethyl alcohol (denatured spirit) in approximately a 1:1 ratio. For creating glazing coatings on wood, the lacquer is diluted with water in approximately a 1:1 ratio. When applying, make sure that the cured film on the surface of the wood is not visually apparent. Wipe off excess lacquer with a cloth. Glazing coatings for outdoor environments are better suggested in a deeper shade (to protect the wooden substrate against UV radiation). Continuous protective films are created by applying or spraying undiluted lacquer in at least two layers. Especially for colorless coatings for outdoor environments, it is necessary to achieve a minimum thickness of the cured film of 120 µm, which is achieved with approximately three layers of undiluted lacquer (with a consumption of around 0.5 kg/m2).

In the case of using the lacquer modification "thick-layer glaze", this thickness can be achieved already in two operations. To strengthen silicate substrates, it is essential to first use a special deep-penetrating agent BILEP F (diluted with approximately 50% water) several times in a row, until it is absorbed, and then treat the prepared substrate with two layers of undiluted lacquer in the chosen shade. The lacquer is applied to a clean, dry substrate free from dirt. The temperature of the substrate or surroundings must not fall below +8°C. Maintain a technological pause between layers - under normal conditions, the optimal time is around 8 hours. Before use, stir the lacquer well, and mix semi-matt and matt during work. Consult more complicated situations with the manufacturer.

Composition:
A mixture of inorganic and special organic pigments in a polyacrylate dispersion in a balanced composition with special additives including UV stabilizers. According to Act No. 86/2002 Coll. in its valid wording, Regulation of the Ministry of the Environment No. 355/2002 Coll. in its valid wording, §13, paragraph 1) the lacquer is not considered a preparation containing organic volatile compounds (VOC).

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H301: Toxic if swallowed.
• H311: Toxic in contact with skin.
• H312: Harmful to health in contact with skin.
• H314: Causes severe burns to skin and eye damage.
• H317: May cause an allergic skin reaction.
• H331: Toxic if inhaled.
• H332: Harmful to health if inhaled.
• H351: Suspected of causing cancer.
• H400: Very toxic to aquatic organisms.
• H410: Very toxic to aquatic organisms with long-lasting effects.

Safety handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P103: Read label before use.
• P262: Avoid contact with eyes, skin or clothing.
• P301+P312: IF SWALLOWED: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor
• P303+P361+P353: IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water/shower.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P390: Absorb spilled product to prevent material damage.
• P411: Store at a temperature not exceeding … °C/…°F.