Dupli-Color Alkyton Gloss, self-priming rust paint, Ral 3020 traffic red, 750 ml

Alkyton gloss is a high-quality alkyd paint with excellent durability, flexibility, abrasion resistance, and quick drying (even at temperatures down to +5 °C). However, its main advantage is its high anti-corrosive capability and the ability to paint over already rusted and heavily rusted metal. ALKYTON gloss covers in one layer in all shades. Effective anti-corrosive pigments provide long-lasting anti-corrosive protection. The product has very good adhesion even on corroded surfaces after manual cleaning. The solvents used give the product excellent flow characteristics – when applied with a brush, a finish of similar quality to that achieved by spraying can be achieved. The modification of alkyd resins with urethanes provides the product with long-lasting color stability and significantly extends gloss.

Recommended use:
ALKYTON is primarily intended for painting new and corroded iron metals in exterior applications. ALKYTON can be applied directly to metal in environments with moderate industrial pollution or using a system with RUST-OLEUM primer for metal structures exposed to more aggressive industrial environments. Increased anti-corrosive protection can be achieved in a system with a quick-drying anti-corrosive primer PRIMER +. Where the surface cannot be cleaned well, use the anti-corrosive primer PENETRATOR. New and oxidized galvanized sheet, inox, light metals, and titanium zinc require pre-treatment using the primer GALVINOL. Thanks to its extreme flexibility and resistance to external influences, ALKYTON can also be applied to mature wood treated with a primer in exterior environments. ALKYTON can also be used for painting concrete. However, it is not intended for painting concrete floors. ALKYTON is not certified for painting children's toys or contact with food. ALKYTON is not intended for permanent immersion.

Application:
ALKYTON can be applied with a brush, roller, or spraying.

Drying:

• Drying at 20 °C and 50% humidity
• to dust - 2 hours
• to touch - 4 hours
• repaintable - 16 hours
• fully cured - 7 days

Solvent:
max 10% Synthetic thinner S6005

Theoretical coverage:
10.5 m²/l at 50µm dry film, depending on the shade.

Surface preparation:
Remove oil, grease, and any other surface contamination with the alkaline cleaner RO ND 14 or pressure (steam) cleaning combined with suitable detergents. Remove scale, loose rust, and poorly adhering residues of old paints with a scraper and steel brush to degree St 2/3 (ISO 8501-1: 1988) or blast to degree Sa 2 1/2 . Sand well-adhered old coatings to ensure good adhesion and check compatibility with RUST-OLEUM coatings. The surface must be dry and clean before and during application.

Instructions for use:
Thoroughly mix the paint before use. If possible, do not dilute / dilution may be necessary if the application is performed at low temperatures/. High dilution reduces the solids content and thus the thickness of the film. Dilution may affect drying times. In environments C1 –C2, it is usually applied on a suitable primer in one layer. In environments C3-C4, it is usually necessary to apply two layers of primer and one layer of Alkyton in the case of steel and two layers of Alkyton in the case of galvanized surfaces.