Dupli-Color Alkyton Gloss, self-priming rust paint, Ral 5010 gentian blue, 750 ml

Alkyton gloss is a high-quality alkyd paint with excellent resistance, flexibility, abrasion resistance and quick drying (even at temperatures down to +5 °C). However, the main advantage is its high anti-corrosion capability and the ability to paint even on already rusted and heavily rusted metal. ALKYTON gloss covers in 1 layer in all shades. Effective anti-corrosive pigments create long-lasting anti-corrosive protection. The product has very good adhesion even to a corroded surface after manual cleaning. The solvents used give the product excellent workability - when applied with a brush, a finish of comparable quality to spraying can be achieved. The modification of alkyd resins with urethanes provides long-lasting color stability and significantly prolongs gloss.

Recommended use:
ALKYTON is primarily intended for painting new and corroded iron metals in outdoor environments. ALKYTON can be applied directly to metal in mildly contaminated industrial environments, or when used in systems with RUST-OLEUM primers on metal structures exposed to more aggressive industrial environments. An increase in anti-corrosion protection can be achieved in a system with the fast-drying anti-corrosive primer PRIMER +. Where the surface cannot be cleaned properly, use the anti-corrosive primer PENETRATOR. New and oxidized galvanized sheet metal, inox, lightweight metals, and titanium-zinc require pre-treatment with the primer GALVINOL. Due to its extreme flexibility and resistance to external influences, ALKYTON can also be applied to seasoned wood treated with a primer in outdoor environments. ALKYTON can also be used for painting concrete. However, it is not intended for painting concrete floors. ALKYTON is not certified for painting children's toys and for contact with food. ALKYTON is not intended for permanent immersion.

Application:
ALKYTON can be applied with a brush, roller or spraying.

Drying:

• Drying at 20 °C and 50% humidity
• to touch - 4 hours
• to recoat - 16 hours
• fully cured - 7 days

Thinner:
max 10% Synthetic thinner S6005

Theoretical coverage:
10.5 m² /l at 50µm dry film, depending on the shade.

Surface preparation:
Remove oil, grease and any other surface contaminants with the alkaline cleaner RO ND 14 or pressure (steam) cleaning combined with suitable detergents. Remove scale, loose rust and poorly adhering residues of old paints with a scraper and steel brush to grade St 2/3 (ISO 8501-1: 1988) or blast to grade Sa 2 1/2. Old, well-adhered paints should be abraded to ensure good adhesion and verify compatibility with RUST-OLEUM paints. The surface must be dry and clean before and during application.

Instructions for use:
Mix the paint thoroughly before use. If possible, do not thin /thinning may be necessary if you are applying at low temperatures/. High thinning reduces the solids content and thus the thickness of the paint film. Thinning may affect drying times. In environments C1 – C2, it is usually applied to a suitable primer in one layer. In environments C3-C4, it is usually necessary to apply 2 coats of primer and one coat of Alkyton in the case of steel and 2 coats of Alkyton in the case of galvanized surfaces.