SPRAY COAT top universal acrylic spray paint, RAL 7001 silver gray, 400 ml

SPRAY COAT is a universal glossy top paint in spray form suitable for coating wood, metal, car bodies, and some plastics. It stands out for its coverage, dries quickly, and does not run after application. It is resistant to weather influences and corrosion. It can be overcoated with a clear acrylic spray varnish.

Universal spray paints are suitable for both repairs and creative crafting. For cleaning tools and spills, we recommend BALTECH S6006 and S6001 thinners.

The paint is not intended for coatings that come into direct contact with food, animal feed, and drinking water, nor for coating children's furniture and toys.

Properties of the spray paint:

• shade RAL 7001 silver gray
• acrylic spray paint
• universal glossy top spray paint
• features high coverage up to 2 m²
• excellent hiding ability
• long-lasting color stability
• quick-drying
• does not run after application
• resistant to weather influences and corrosion
• can be overcoated with clear acrylic spray varnish
• on any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Use of spray paint:

Wherever paint is needed. For new coatings, refreshing colors, repairs, paint for wood, paint for metal, car bodies, glass, plastic, PVC (with a base), masonry, etc.

Paint spray coverage:

2 m²/pack

Before using spray paint:

1. Prepare the surface well (dry, clean, free of rust)
2. Shake the contents thoroughly until you hear the mixing ball moving freely inside the container; repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm away from the sprayed surface, and press the nozzle completely.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance in 15-minute intervals.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may find covering material, such as paper masking tape or covering film, or possibly sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. Container is under pressure: may explode when heated.
• H229: Container is under pressure: may explode when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.