BALSPREJ top universal acrylic spray paint, RAL 6001 emerald green, 400 ml

Universal top glossy spray paint BALSPREJ is designed for spraying wooden and metal surfaces, car bodies, and selected plastics. It offers high coverage, dries quickly, and does not run during application. It is characterized by its resistance to corrosion and weathering. It is over-sprayable with a clear acrylic spray varnish.

These universal spray paints can be used for repair work as well as for creative projects. We recommend using BALTECH S6006 and S6001 thinners to clean tools and stained areas.

This product is not intended for coatings in direct contact with drinking water, animal feed, or food, and must not be used on toys or children's furniture.

Properties of spray paint:

• RAL 6001 emerald green shade
• acrylic spray paint
• top glossy spray paint for universal use
• stands out with a high yield of up to 2 m²
• excellent coverage ability
• long-lasting color stability
• fast-drying
• does not run after spraying
• resistant to corrosion and weathering
• can be over-sprayed with a clear acrylic spray varnish
• suitable for any substrate: wood, metal, glass, plastic, stone, and concrete
• for indoor and outdoor use

Uses of spray paint:

Wherever paint is needed. For new coatings, refreshing color, repairs, paint for wood, paint for metal, car bodies, glass, plastic, PVC (with a base), masonry, etc.

Spray paint coverage:

2 m²/pack

Before using spray paint:

1. Prepare the surface well (dry, clean, free of rust)
2. Shake the contents thoroughly until you hear the mixing ball move freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm away from the sprayed surface and press the nozzle completely down.
4. Test the spray on a similar sample first.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at intervals of 15 min.
6. It is always better to apply 2 thin coats than one thick coat.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air without paint comes out. Remove the clogged nozzle and clean it with a needle.

You may find covering material, such as paper masking tape or covering foil, or perhaps sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: may burst when heated.
• H229: The container is under pressure: may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container according to the instructions on the product.