BALSPREJ top universal acrylic spray paint, RAL 6029 mint green, 400 ml

BALSPREJ is a universal glossy top spray paint suitable for painting wood, metal, car bodies, and some plastics. It stands out for its coverage, is quick-drying, and does not run after spraying. It is resistant to weather influences and corrosion. It can be overcoated with a clear acrylic spray lacquer.

Universal spray paints are suitable for both repairs and creative crafting. For washing tools and drips, we recommend BALTECH S6006 and S6001 thinners.

The paint is not intended for surfaces that come into direct contact with food, animal feed, drinking water, or for painting children's furniture and toys.

Properties of the spray paint:

• shade RAL 6029 mint green 
• acrylic spray paint
• universal glossy top spray paint
• distinguishes itself with a high coverage of up to 2 m²
• excellent hiding power
• long-lasting color stability
• quick-drying
• does not run after spraying
• resistant to weather influences and corrosion
• can be overcoated with a clear acrylic spray lacquer
• for any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Application of the spray paint:

Wherever paint is needed. For new coatings, refreshing color, repairs, paint for wood, paint for metal, car bodies, glass, plastic, PVC (with a base), masonry, etc.

The paint spray coverage:

2 m² / package

Before using the spray paint:

1. Prepare the surface well (dry, clean, free from rust)
2. Shake the contents thoroughly until you hear the mixing ball moving freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm away from the sprayed surface and press the nozzle fully.
4. First test the spray on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at intervals of 15 min.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may find it useful to have covering material, such as paper adhesive tape or covering foil, or possibly sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: may burst when heated.
• H229: The container is under pressure: may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.