BALSPREJ top universal acrylic spray paint, RAL 9003 signal white, 400 ml

BALSPREJ is a universal glossy top coat spray paint usable for coatings of wood, metal, car bodies, some plastics. It stands out for its yield, is fast-drying, and does not run after spraying. It is resistant to weather conditions and corrosion. It can be overcoated with a clear acrylic spray lacquer.

Universal spray paints are suitable for both repairs and creative crafting. For cleaning tools and spills, we recommend BALTECH S6006 and S6001 thinners.

The paint is not intended for coatings that come into direct contact with food, feed, and drinking water, and for coatings of children's furniture and toys.

Properties of the spray paint:

• shade RAL 9003 signal white
• acrylic spray paint
• universal glossy top coat spray paint
• features high yield of up to 2 m²
• excellent covering power
• long-lasting color fastness
• fast-drying
• does not run after spraying
• resistant to weather conditions and corrosion
• can be overcoated with a clear acrylic spray lacquer
• on any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Usage of the spray paint:

Wherever paint is needed. For new coatings, refreshing color, repairs, paint for wood, paint for metal, car body, glass, plastic, PVC (with a base), masonry, etc.

Spray paint yield:

2 m² / packaging

Before using the spray paint:

1. Prepare the surface well (dry, clean, rust-free)
2. Shake the contents thoroughly until you hear the mixing balls move freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm away from the sprayed surface and push the nozzle fully down.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at intervals of 15 minutes.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may find it useful to have masking materials, such as paper masking tape or masking film, or sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: may burst when heated.
• H229: The container is under pressure: may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.