BALSPREJ top universal acrylic spray paint, RAL 3003 ruby red, 400 ml

BALSPREJ is a universal glossy top spray paint that can be used for coatings on wood, metal, car bodies, and some plastics. It stands out for its efficiency, dries quickly, and does not drip after spraying. It is resistant to weather conditions and corrosion. It can be repainted with a colorless acrylic spray lacquer.

Universal spray paints are suitable for both repairs and creative crafting. For cleaning tools and spills, we recommend the BALTECH S6006 and S6001 thinners.

The paint is not intended for coatings that come into direct contact with food, feed, and drinking water, and for coatings on children's furniture and toys.

Properties of the spray paint:

• shade RAL 3003 ruby red
• acrylic spray paint
• universal glossy top spray paint
• features high efficiency of up to 2 m²
• excellent coverage ability
• long-lasting color stability
• dries quickly
• does not drip after spraying
• resistant to weather conditions and corrosion
• can be repainted with a colorless acrylic spray lacquer
• on any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Use of the spray paint:

Wherever paint is needed. For new coatings, color refreshing, repairs, paint for wood, paint for metal, car bodies, glass, plastic, PVC (with a primer), masonry, etc.

Paint spray coverage:

2 m²/ package

Before using the spray paint:

1. Prepare the surface well (dry, clean, free of rust)
2. Shake the contents thoroughly until you hear the mixing ball move freely inside the container, and repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm away from the sprayed surface and press the nozzle completely down.
4. Test the spray on a similar sample first.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at intervals of 15 min.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air without paint comes out. Remove the clogged nozzle and clean it with a needle.

You may need covering material, such as paper tape or covering film, or possibly sandpapers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin drying or cracking.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: may burst when heated.
• H229: The container is under pressure: may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.