SPRAY PAINT top universal acrylic spray paint, RAL 7040 gray window, 400 ml

SPRAY PAINT is a universal glossy top paint in spray form usable for coating wood, metal, car bodies, and some plastics. It excels in coverage, dries quickly, and does not run after spraying. It is resistant to weather conditions and corrosion. It can be overcoated with a Clear acrylic spray lacquer.

Universal spray paints are suitable for both repairs and creative crafting. For cleaning tools and spills, we recommend BALTECH S6006 and S6001 solvents.

The paint is not intended for surfaces that come into direct contact with food, feed, and drinking water, and for painting children's furniture and toys.

Properties of spray paint:

• shade RAL 7040 gray window
• acrylic spray paint
• universal glossy top spray paint
• excels with a high coverage of up to 2 m²
• excellent hiding power
• long-lasting color stability
• quick-drying
• does not run after spraying
• resistant to weather conditions and corrosion
• can be overcoated with clear acrylic spray lacquer
• on any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Usage of spray paint:

Wherever paint is needed. For new coatings, refreshing color, repairs, paint for wood, metal, car body, glass, plastic, PVC (with a primer), masonry, etc.

Paint spray yield:

2 m²/package

Before using spray paint:

1. Prepare the surface well (dry, clean, rust-free)
2. Shake the contents thoroughly until you hear the mixing ball move freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the can 25-30 cm from the surface being sprayed and push the nozzle completely.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at 15 min intervals.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the can upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it using a needle.

You may find it useful to have covering material, such as paper masking tape or covering foil, or even sandpaper.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: it may burst when heated.
• H229: The container is under pressure: it may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have the product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition sources.
• P251: Do not pierce or burn even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER or doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.