BALSPREJ top universal acrylic spray paint, RAL 6018 yellow-green, 400 ml

BALSPREJ is a universal glossy top spray paint suitable for painting wood, metal, bodies, and some plastics. It is characterized by high yield, quick drying, and does not run after spraying. It is resistant to weather influences and corrosion. It can be overcoated with a clear acrylic spray varnish.

Universal spray paints are suitable for both repairs and creative crafting. We recommend BALTECH S6006 and S6001 solvents for cleaning tools and spills.

The paint is not intended for coatings that come into direct contact with food, animal feed, and drinking water, and for painting children's furniture and toys.

Properties of spray paint:

• RAL 6018 yellow-green shade
• acrylic spray paint
• universal glossy top spray paint
• characterized by high yield up to 2 m²
• excellent covering ability
• long-lasting color stability
• quick-drying
• does not run after spraying
• resistant to weather influences and corrosion
• can be overcoated with a clear acrylic spray varnish
• on any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Using the spray paint:

Everywhere color is required. For new coatings, refreshing paint, repairs, wood color, metal color, body, glass, plastic, PVC (with a base), masonry, etc.

Spray paint yield:

2 m² per package

Before using the spray paint:

1. Prepare the surface well (dry, clean, rust-free)
2. Shake the contents thoroughly until you hear the mixing balls moving freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm away from the sprayed surface and press the nozzle completely.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at 15-minute intervals.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may find it useful to have covering material, such as paper masking tape or covering film, or sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. Container is under pressure: it may burst when heated.
• H229: Container is under pressure: it may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safety instructions (P-statements)

• P101: If medical advice is needed, keep container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition source.
• P251: Do not pierce or burn even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.