BALSPREJ top universal acrylic spray paint, RAL 9010 white gloss, 400 ml

BALSPREJ is a universal glossy top coat spray paint suitable for painting wood, metal, car bodies, and some plastics. It excels in coverage, is quick-drying, and does not run after spraying. It is resistant to weathering and corrosion. It can be repainted with transparent acrylic spray varnish.

Universal spray paints are suitable for both repairs and creative crafting. For cleaning tools and spills, we recommend BALTECH S6006 and S6001 thinners.

The paint is not intended for surfaces that come into direct contact with food, feed, drinking water, and for painting children's furniture and toys.

Features of the spray paint:

• shade RAL 9010 white gloss
• acrylic spray paint
• shades according to the RAL color sample
• universal glossy top coat spray paint
• excels in high coverage of up to 2 m²
• excellent hiding ability
• long-lasting color stability
• quick-drying
• does not run after spraying
• resistant to weathering and corrosion
• can be repainted with clear acrylic spray varnish
• on any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Usage of the spray paint:

Anywhere where paint is needed. For new coats, refreshing color, repairs, paint for wood, paint for metal, car body, glass, plastic, PVC (with base), masonry, etc.

Spray paint coverage:

2 m²/package

Before using the spray paint:

1. Prepare the surface well (dry, clean, free of rust)
2. Shake the contents thoroughly until you hear the mixing ball moving inside the container; repeat several times during use.
3. 20 °C is the ideal temperature; hold the container at a distance of 25-30 cm from the sprayed surface and press the nozzle completely down.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend applying very fine layers sprayed from a greater distance in 15-minute intervals.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may need masking materials, such as paper tape or masking film, or possibly sanding paper.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: may burst when heated.
• H229: The container is under pressure: may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.