BALSPREJ top universal acrylic spray paint, RAL 6003 olive green matte, 400 ml

Universal matte covering spray paint BALSPREJ is suitable for spraying metal, wood, body parts, and selected plastics. It features excellent coverage, dries quickly, and does not run during application. It withstands weather conditions and corrosion well. The surface can be overcoated with a clear acrylic spray lacquer.

These universal spray paints are useful for various repairs and creative projects. To clean soiled areas and tools, we recommend using BALTECH S6006 or S6001 thinner.

This coating is not intended for surfaces that come into direct contact with drinking water, food, or feed, nor for children's furniture or toys.

Properties of the spray paint:

• shade RAL 6003 olive green matte
• acrylic spray paint
• shades according to the RAL color chart
• universal top paint in matte finish spray
• features a high coverage of up to 2 m²
• excellent hiding power
• long-lasting color stability
• quick-drying
• does not run after spraying
• resistant to weather effects and corrosion
• can be overcoated with a clear acrylic spray lacquer
• suitable for various substrates such as metal, glass, wood, plastic, concrete, or stone
• for indoor and outdoor use

Application of the spray paint:

Wherever paint is needed. For new coatings, refreshing color, repairs, paint for wood, metal, bodywork, glass, plastics, PVC (with a base), masonry, etc.

Spray paint coverage:

2 m²/packaging

Before using the spray paint:

1. Prepare the surface well (dry, clean, free of rust)
2. Shake the contents thoroughly until you hear the mixing ball moving freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm from the sprayed surface and press down the nozzle completely.
4. Test the spray on a similar sample first.
5. For certain surfaces, we recommend applying very fine layers sprayed from a greater distance at intervals of 15 minutes.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may find covering materials useful, such as paper adhesive tape or covering foil, or sanding papers.

Product safety warnings (H-statements)

• H222+H229: Extremely flammable aerosol. The container is under pressure: may burst when heated.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.