BALSPREJ top universal acrylic spray paint, RAL 1015 ivory, 400 ml

BALSPREJ is a universal glossy top spray paint usable for coating wood, metal, car bodies, and some plastics. It stands out for its yield, is quick-drying, and does not run after spraying. It is resistant to weather conditions and corrosion. It can be overcoated with a clear acrylic spray varnish.

Universal spray paints are suitable for both repairs and creative creation. For cleaning tools and drips, we recommend BALTECH S6006 and S6001 thinners.

The paint is not intended for coatings that come into direct contact with food, animal feed, and drinking water, and for coatings on children's furniture and toys.

Properties of the spray paint:

• shade RAL 1015 ivory
• acrylic spray paint
• universal glossy top spray paint
• distinguished by a high yield of up to 2 m²
• excellent hiding power
• long-lasting color stability
• quick-drying
• does not run after spraying
• resistant to weather conditions and corrosion
• can be overcoated with clear acrylic spray varnish
• on any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Application of the spray paint:

Everywhere paint is needed. For new coatings, refreshing color, repairs, paint for wood, paint for metal, car body, glass, plastic, PVC (with base), masonry, etc.

Coverage of spray paint:

2 m²/ package

Before using the spray paint:

1. Prepare the surface well (dry, clean, rust-free)
2. Shake the contents thoroughly until you hear the mixing balls moving freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm from the sprayed surface and press the nozzle completely.
4. Test spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance in intervals of 15 min.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may find covering material, such as paper masking tape or covering film, or sanding papers.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause dry skin or cracking.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: it may rupture when heated.
• H229: The container is under pressure: it may rupture when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safety handling instructions (P-phrases)

• P101: If medical assistance is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.