BALSPREJ top universal acrylic spray paint, RAL 5010 gentian blue, 400 ml

BALSPREJ is a universal glossy top spray paint suitable for painting wood, metal, car bodies, and some plastics. It excels in coverage, is fast-drying, and does not drip after spraying. It is resistant to weathering and corrosion. It can be overpainted with clear acrylic spray lacquer.

Universal spray paints are suitable both for repairs and creative crafting. For washing tools and spills, we recommend BALTECH S6006 and S6001 thinners.

The paint is not intended for surfaces that come into direct contact with food, animal feeds, and drinking water, and for painting children's furniture and toys.

Properties of the spray paint:

• shade RAL 5010 gentian blue
• acrylic spray paint
• universal glossy top spray paint
• excels with high coverage up to 2 m²
• excellent opacity
• long-lasting color stability
• fast-drying
• does not drip after spraying
• resistant to weathering and corrosion
• can be overpainted with clear acrylic spray lacquer
• on any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Usage of the spray paint:

Everywhere a paint is needed. For new coatings, refreshing color, repairs, paint for wood, paint for metal, car bodies, glass, plastic, PVC (with a primer), masonry, etc.

Spray paint coverage:

2 m²/packaging

Before using the spray paint:

1. Prepare the surface well (dry, clean, free of rust)
2. Shake the contents thoroughly until you hear the mixing balls move freely inside the can, repeat several times during use.
3. 20 °C is the ideal temperature, hold the can 25-30 cm away from the sprayed surface and press the nozzle down completely.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at intervals of 15 minutes.
6. It is always better to apply 2 thin coats than one thick one.
7. To clean the nozzle, turn the can upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may need masking material, such as paper masking tape or masking film, or possibly sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. Container is under pressure: may burst when heated.
• H229: Container is under pressure: may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a POISON CENTER/doctor.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.