BALSPREJ top universal acrylic spray paint, RAL 1028 melon yellow, 400 ml

Universal top spray paint BALSPREJ with a glossy finish is suitable for spraying metal and wooden surfaces, car bodies, or selected plastics. It offers high yield, dries quickly, and does not run after application. It is characterized by resistance to weathering and corrosion and can be overcoated with clear acrylic spray lacquer.

This universal spray paint can be used for regular repairs as well as creative projects. BALTECH S6006 and S6001 thinners are recommended for cleaning tools or removing drips.

The product is not intended for surfaces in direct contact with drinking water, food, or animal feed, nor for coatings of toys and children's furniture.

Spray paint properties:

• shade RAL 1028 melon yellow
• acrylic spray paint
• universal top spray paint in a glossy finish
• features a high coverage of up to 2 m²
• excellent hiding power
• long-lasting color fastness
• quick drying
• does not run after spraying
• resistant to weather effects and corrosion
• can be overcoated with clear acrylic spray lacquer
• suitable for various types of substrates such as wood, metal, glass, plastic, stone, or concrete
• for indoor and outdoor use

Use of spray paint:

Everywhere where paint is needed. For new coatings, refreshing color, repairs, paint for wood, paint for metal, car body, glass, plastic, PVC (with a base), masonry, etc.

Spray paint yield:

2 m²/ package

Before using spray paint:

1. Prepare the surface well (dry, clean, rust-free)
2. Thoroughly shake the contents until you hear the mixing balls move freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm away from the sprayed surface and press the nozzle completely.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at 15-minute intervals.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You may find masking material, such as paper adhesive tape or masking foil, or sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: it may burst when heated.
• H229: The container is under pressure: it may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-statements)

• P101: If medical assistance is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER or doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.