BALSPREJ top universal acrylic spray paint, RAL 2008 orange, 400 ml

BALSPREJ is a universal glossy top spray paint suitable for painting wood, metal, bodywork, and some plastics. It stands out for its high yield, dries quickly, and does not drip after spraying. It is resistant to weathering and corrosion. It can be overcoated with a clear acrylic spray varnish.

Universal spray paints are suitable for both repairs and creative projects. For cleaning tools and spills, we recommend BALTECH S6006 and S6001 thinners.

The paint is not intended for surfaces that come into direct contact with food, feed, and drinking water, and for painting children’s furniture and toys.

Properties of the spray paint:

• shade RAL 2008 orange
• acrylic spray paint
• universal glossy top spray paint
• features a high yield of up to 2 m²
• excellent covering power
• long-lasting color stability
• quick-drying
• does not drip after spraying
• resistant to weather and corrosion
• can be overcoated with a clear acrylic spray varnish
• suitable for any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Application of the spray paint:

Wherever paint is needed. For new coats, refreshing color, repairs, paint for wood, paint for metal, bodywork, glass, plastic, PVC (with a base), masonry, etc.

Spray paint yield:

2 m² / packaging

Before using the spray paint:

1. Prepare the surface well (dry, clean, free of rust)
2. Shake the contents thoroughly until you hear the mixing balls move freely inside the container, repeat this several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm away from the sprayed surface and press the nozzle fully.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at intervals of 15 min.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air without paint comes out. Remove the clogged nozzle and clean it with a needle.

You may find masking material, such as paper masking tape or masking film, or sandpaper.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: it may burst when heated.
• H229: The container is under pressure: it may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-statements)

• P101: If medical assistance is needed, have the product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container according to product instructions.