BALTECH Rust Remover, No Rinse, 1 L

No rinse rust remover with a stabilizer, high effectiveness in removing corrosion. The rust remover is applied by painting, spraying, or immersion. In cases of severe corrosion, the application of the rust remover should be repeated 2 to 3 times.

Surface preparation:
The area intended for rust removal should first be mechanically cleaned with a brush to remove loosely adhering particles of corrosion and dirt.

Instructions for use:
Before use, the rust remover solution should be stirred. The rust remover is applied by painting, spraying, or immersion. In cases of severe corrosion, the application of the rust remover should be repeated 2 to 3 times. When using immersion, the application time is 5 minutes. The effect of the rust remover is indicated by the formation of a blue-black coloration on the surface of the item. The treated surface should be allowed to dry under normal climatic conditions for at least 24 hours, before surface treatment wipe off the resulting whitish-gray, dry powder with a cloth and continue to treat with standard coatings without rinsing.

Diluent:
Water

Coverage:
500 g of rust remover is sufficient for treating 10-40 m2 of metal surface

Product safety warning (H-statements)

• H315: Causes skin irritation.
• H319: Causes serious eye irritation.

Safety handling instructions (P-statements)

• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the instructions on the product.