SPRAY PAINT top universal acrylic spray paint, RAL 3000 fire red, 400 ml

SPRAY PAINT is a universal glossy top paint in a spray can usable for coatings on wood, metal, bodies, and some plastics. It excels in yield, is quick-drying, and does not run after application. It is resistant to weather conditions and corrosion. It can be overcoated with a clear acrylic spray varnish.

Universal spray paints are suitable for both repairs and creative crafting. For cleaning tools and spills, we recommend solvents BALTECH S6006 and S6001.

The paint is not intended for surfaces that come into direct contact with food, animal feed, and drinking water, and for painting children’s furniture and toys.

Properties of the spray paint:

• shade RAL 3000 fire red
• acrylic spray paint
• universal glossy top spray paint
• excels in high yield up to 2 m²
• excellent coverage
• long-lasting color stability
• quick-drying
• does not run after application
• resistant to weather conditions and corrosion
• can be overcoated with a clear acrylic spray varnish
• for any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Usage of the spray paint:

Wherever paint is needed. For new coatings, refreshing color, repairs, paint for wood, paint for metal, bodies, glass, plastic, PVC (with a base), masonry, etc.

Spray paint yield:

2 m²/package

Before using the spray paint:

1. Prepare the surface well (dry, clean, rust-free)
2. Shake the contents thoroughly until you hear the mixing balls move freely inside the container, repeat several times during use.
3. 20 °C is the ideal temperature, hold the container 25-30 cm from the sprayed surface and fully depress the nozzle.
4. Test the spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at 15-minute intervals.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air without paint comes out. Remove the clogged nozzle and clean it with a needle.

You may find covering material, such as paper adhesive tape or covering foil, or sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: it may burst when heated.
• H229: The container is under pressure: it may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray near an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501: Dispose of contents/container in accordance with local regulations.