BALSPREJ top universal acrylic spray paint, RAL 1003 signal yellow, 400 ml

BALSPREJ is a universal glossy top spray paint suitable for coating wood, metal, car bodies, and some plastics. It stands out for its coverage, dries quickly, and does not drip after spraying. It is resistant to weather influences and corrosion. It can be overcoated with a clear acrylic spray varnish.

Universal spray paints are suitable for both repairs and creative projects. For washing tools and spills, we recommend BALTECH S6006 and S6001 thinners.

The paint is not intended for coatings that come into direct contact with food, animal feed, and drinking water, as well as for coatings of children's furniture and toys.

Properties of spray paint:

• shade RAL 1003 signal yellow
• acrylic spray paint
• universal glossy top spray paint
• features high coverage up to 2 m²
• excellent opacity
• long-lasting color stability
• quick-drying
• does not drip after spraying
• resistant to weather influences and corrosion
• can be overcoated with a clear acrylic spray varnish
• for any type of surface, such as metal, glass, wood, plastic, concrete, stone
• for indoor and outdoor use

Use of spray paint:

Everywhere that paint is needed. For new coatings, refreshing paint, repairs, paint for wood, paint for metal, car body, glass, plastic, PVC (with a base), masonry, etc.

Spray paint coverage:

2 m² / package

Before using spray paint:

1. Prepare the surface well (dry, clean, rust-free)
2. Shake the contents thoroughly until you hear the mixing balls moving freely inside the container; repeat this several times during use.
3. 20 °C is the ideal temperature; hold the container 25-30 cm away from the sprayed surface and press the nozzle fully.
4. Test spray first on a similar sample.
5. For certain surfaces, we recommend very fine layers sprayed from a greater distance at intervals of 15 minutes.
6. It is always better to apply 2 thin layers than one thick one.
7. To clean the nozzle, turn the container upside down and press the nozzle until only air comes out without paint. Remove the clogged nozzle and clean it with a needle.

You might find useful protective material, such as paper masking tape or protective film, or sanding papers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of skin.
• H222: Extremely flammable aerosol.
• H222+H229: Extremely flammable aerosol. The container is under pressure: it may burst when heated.
• H229: The container is under pressure: it may burst when heated.
• H318: Causes serious eye damage.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray into an open flame or other ignition sources.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/smoke/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C / 122 °F.
• P501: Dispose of contents/container according to product instructions.