BARLET silicone base S A, white, 20 kg

The facade silicone paint Barlet silicone S is used for the surface treatment of facades, lime-cement plasters, concrete, aerated concrete, particleboard materials and similar substrates. The coating is primarily intended for application by spraying. It is available in base A and base C variants.

Substrate preparation:

The substrate must be dry and mature. Treat overly absorbent, crumbling or non-cohesive substrates with BARLET SILIKON PENETRACE penetration. Dilute the paint with a maximum of 5% water and mix thoroughly. Apply the paint by spraying with AIRLESS after the penetration has dried, for example, with STORCH AIRLESS ST 550, STORCH AIRLESS ST 700 or STORCH AIRLESS ST 800 with a recommended pressure of 100 – 130 bar, nozzle size 517 or 519, 50 mesh filter for the gun. When spraying, we always recommend performing tests on specific equipment beforehand. We advise more frequent checks of the gun filter. The paint can also be applied with a brush or roller in two layers after the previous layer has completely dried.

Details:

• Application method: paint brush, paint roller, spraying (including AIRLESS),
• Type water-based
• Environment exterior
• Coverage 6 – 8 m2/kg in one layer
• Packaging variants 4 hours.