BARLET Acrylic Facade Paint White Base A, 1 kg

BARLET acrylic Plus base A is a modern acrylic facade paint intended for tinting at our stores, white base A is used as a white facade paint. With low consumption, it excellent coverage, covers micro-cracks, and is very suitable for the renovation of insulation systems. It is used for painting lime-cement plasters, concrete, aerated concrete, chipboard, and renovation plasters in interiors and exteriors.

It is used for painting insulated facades, lime-cement plasters, concrete, aerated concrete, chipboard, and similar surfaces. The paint is resistant to selected disinfectants (can be used for painting repeatedly disinfected interiors in hospitals). Resistance to the action of liquids according to ČSN EN ISO 2812-1:2013, Method 1. It shows resistance to wet abrasion according to ČSN EN ISO 11998 class 2 (classification according to EN
13300). The paint is easy to process, safe for health, and environmentally friendly.

Properties of BARLET facade paint:

• acrylic facade paint
• for painting new and old facades
• renovation of insulation systems
• highly vapor-permeable
• resistant to disinfectants and liquids
• weather-resistant
• can be used for painting repeatedly disinfected interiors in hospitals
• easy to process
• safe for health
• environmentally friendly facade paint
• shows resistance to wet abrasion according to ČSN EN ISO 11998 class 2 (classification according to EN 13300)

Technical properties of acrylic facade paint:

• coverage depending on the absorbency of the substrate 6 to 8 m²/1 kg
• water-dilutable facade paint
• for substrates such as plasters, coatings of insulation systems, concrete, etc.
• interior or exterior environment
• shade white
• for tinting in TELURMIX systems
• application with a brush, roller, or spraying

Application method of facade paint:

Brush, roller, AIRLESS spraying e.g. STORCH AIRLESS ST 550, STORCH AIRLESS ST 700 or STORCH AIRLESS ST 800 recommended pressure from 100 – 130 bar, nozzle size 517 or 519, filter for the gun 50 mesh. When spraying, we always recommend testing on specific equipment beforehand.

Example of applied acrylic facade paint

The substrate must be dry and matured. Too absorbent, crumbling, or non-adhering substrates should be treated with a suitable acrylic primer REMAL, BARLET, or SOICRAT. Dilute the paint with max. 5 - 10% water and mix thoroughly. Apply the paint after the primer has dried in two layers with a brush or roller. The paint can also be applied by pressure spraying. Subsequent layers should be applied only after complete drying. The optimal temperature for painting is 15 to 25 °C. For cohesive areas, use products from one batch, mix different batches together before use.

Handling of facade paint:

When working, observe basic hygiene rules. The product is not intended for surfaces that come into direct contact with food, feed, and drinking water. Keep out of reach of children. If you feel unwell, seek medical advice. The product is treated with a biocide. It contains 2-octyltetrahydroisothiazol-3-one, reactive mixture: 5-chloro-2-methylisothiazol-3(2H)-one [ES number 247-500-7] and 2-methylisothiazol-3(2H)-one [ES number 220 -239-6] (3:1), 2-methylisothiazol-3(2H)-one.

Shelf life of acrylic facade paint:

The product retains its useful properties for 5 years from the date of manufacture, in the original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.

Disposal of acrylic facade paint containers and waste:

Containers with residual product should be disposed of at a location designated by the municipality for collecting other waste. See also section 13 of the product's safety data sheet.

Washability of the paint is practically addressed by the standard WET ABRASION RESISTANCE ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining wet abrasion resistance and washability of paint. Regarding the cleanability of coatings, it only establishes the testing method itself but does not specify the contaminants. After drying and conditioning, the painted sample is weighed and subjected to wet cleaning cycles in a testing abrasion (cleaning) device. The weight loss is calculated to determine the average thickness loss of the coating. To determine cleanability, contaminants are applied to similarly prepared samples. Specified contaminants are allowed to remain in contact with the coating film for a prescribed period. The painted, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminant has been removed and whether the coating is resistant to wet abrasion.

For the evaluation, 5 classes are used - class 1 is the best - class 5 is the worst. Grading is like in school.

Product safety warnings (H-statements)

• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with local regulations.