Bisil Thermo heat-resistant paint 700 °C, 0199 black, 80 g

The paint is specially designed to protect steel and cast iron surfaces subjected to cyclic thermal stress. It is used for protective coatings of fireplaces, flues, steam pipes, engines, heat exchangers, solar connectors...

The paint is intended for finishing surfaces of steel and cast iron objects and structures exposed to one-time or cyclical thermal stress. The paint is formulated based on high-quality silicone resin using modern inorganic spinel pigments, which do not degrade even at temperatures around 700 °C.

The paint can be used to treat metal parts of fireplaces, stoves, flues, steam pipes, engines, heat exchangers, solar collectors. The paint is intended for coatings or sprays on structures that are subjected to temperatures up to 700 °C for a short time, and long-term up to 550 °C.

Working procedure:
1,) The paint is applied with a brush, roller, spraying, or dipping. It is preferable to apply the first layer with a brush. Maintain a time interval of at least 4 hours between individual layers under normal conditions.
2.) Ideally, let each layer dry and cure at 230 °C for 30 minutes.
3.) The coating system does not have to be cured, but it is softer and does not withstand the action of organic solvents. When later curing the entire coating system, pay attention to a gradual temperature increase!!! The most suitable preparation of steel and cast iron surfaces is sandblasting.

Substrate:
Remove rust and old degraded coatings from the substrate and degrease it! Optimal degreasing of the substrate ... e.g. 2 × coating with a special preparatory product IZOKOR. This is followed by the actual coating system usually 2 × CORSIL + at least 2 × BISIL Thermo. For substrate preparation and application of the coating system, it is recommended to adhere to the principles of technical standards ČSN EN ISO 12944 1-8 and accompanying regulations ČSN ISO 8501 1-2, 8502 2-6, … ).

Product safety warnings (H-phrases)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Safety handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P240: Ground container and receiving equipment.
• P241: Use explosion-proof electrical/ventilating/lighting/... equipment.
• P242: Use only non-sparking tools.
• P243: Take precautionary measures against static discharge.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P321: Specific treatment (see ... on the label).
• P362: Take off contaminated clothing.
• P370+P378: In case of fire: Use fire extinguisher/sand/carbon dioxide according to the safety data sheet to extinguish.
• P391: Collect spillage.
• P403+P235: Store in a well-ventilated place. Keep cool.
• P501: Dispose of contents/container in accordance with product instructions.