REMAL Ekonomik universal wall paint, 25 kg

REMAL Ekonomik is a paint with optically enhanced whiteness, opacity, and high vapor permeability. REMAL Ekonomik paint is used for painting plaster, concrete, drywall, cement boards, particleboard, and renovation plasters in interiors. The paint is made from natural limestone, which allows for the application of multiple layers. Due to its composition, it enables faster drying. The wall paint REMAL Ekonomik has a whiteness of 94%.

The interior paint for walls and ceilings REMAL Ekonomik is easy to work with, non-toxic, and environmentally friendly. It shows resistance to wet abrasion after 28 days - class 5. (measured according to ČSN EN ISO 11998, classified according to EN 13300).

Paint with pleasure - free painting cookbook

Features of REMAL Ekonomik wall paint:

• wall paint with a good price-to-quality ratio
• paint with increased whiteness of 94%
• traditional Czech white wall paint REMAL
• suitable paint for coatings in residential and commercial spaces
• suitable for walls, ceilings, plasters, concrete, or drywall in interiors
• paint suitable for renovation plasters
• highly breathable wall paint
• vapor-permeable wall paint
• increased coverage capability
• very easy to work with
• water-based natural paint
• non-toxic
• can be tinted paint
• easily washable wall paint
• wash resistance class 5
• the packaging of the paint of size 25 kg will cover up to 275 m² in one coat

Technical properties of REMAL Ekonomik white wall paint:

• coverage 11 m²/1 kg in one layer
• tinting is possible with common REMAL tinting pastes liquid tinting paint or REMAKOL, alternatively at our stores
• paint for interior plaster on walls and ceilings, drywall, and other substrates
• water-based wall paint
• the paint is applied with a roller, brush, or spraying (including AIRLESS)
• whiteness of the paint 94%
• resistance to wet abrasion after 28 days - class 5. (measured according to ČSN EN ISO 11998, classified according to EN 13300)
• viscosity 3000 - 4500 mPas (Brookfield HB DV 2+ 4/100)
• content of non-volatile substances min. 60%
• pH 8.5 - 10

Procedure for wall paint REMAL Ekonomik:

Before painting with the universal REMAL Ekonomik paint remove layers of old and non-adherent paint. It is advisable to treat absorbent substrates with REMAL universal primer, and to treat non-adherent and crumbling substrates with REMAL deep primer. This will remove dust from the surface, strengthen it, unify absorption, and ensure the adhesion of the paint coat. The drying time is 4 hours. Level any unevenness on the wall with REMAL compound. Dilute the coating with a maximum ratio of 0.2 l of water to 1 kg of paint. Then mix thoroughly.

Apply the paint with a brush, roller, or spraying in 2 layers; apply the next coat of paint after the previous one has dried, at least after 4 hours. The optimal temperature for painting the paint is 15 to 25 °C. The temperature of the substrate and the environment must not drop below 5 °C during the application of the wall paint. Use a product from the same batch for large areas; mix different batches together before use.

Handling of REMAL Ekonomik wall paint:

When working, observe basic hygiene rules. The product is not intended for coatings coming into direct contact with food, animal feed, drinking water or for painting children's toys and furniture. Keep out of reach of children. If you feel unwell, seek medical attention.

The product is treated with a biocide. Contains 1,3,5-tris(2-hydroxyethyl)hexahydro-1,3,5-triazin, 1,2-benzoisothiazol-3(2H)-one, reaction mixture: 5-chlor-2-methylisothiazol-3(2H)-one [ES number 247-500-7] and 2-methylisothiazol-3(2H)-one [ES number 220-239-6] (3:1), octhilinone (ISO). May cause allergic reaction.

You might find useful

covering material, such as paper adhesive tape or covering foil, possibly sanding papers. Don’t forget brushes, rollers, paint brushes, and scrapers.

Washability of the paint in practice is solved by the standard WET ABRASION RESISTANCE ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining resistance to wet abrasion and washability of the paint. Regarding the cleanability of coatings, it only establishes the testing method itself but does not specify the contaminating substances. After drying and conditioning, the painted sample is weighed and subjected to wet cleaning cycles in a test abrasiveness (cleaning) device. From the loss of weight, the average thickness loss of the coating is calculated. For determining cleanability, contaminating substances are applied to equally prepared samples. The specified contaminants are left in contact with the coating film for the prescribed time. The painted, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminating substance has been removed and if the coating is resistant to wet abrasion.

For assessment, 5 classes are used - class 1 is the best – class 5 is the worst. Grading as in school.