Bisil Thermo heat-resistant paint 700 °C, silver, 700 g

The paint is specially formulated to protect steel and cast iron surfaces exposed to cyclic thermal stress. It is used for protective coatings of fireplaces, flue pipes, steam pipes, engines, heat exchangers, solar collectors...

The paint is designed for the final finishing of surfaces of steel and cast iron objects and constructions exposed to single or cyclic thermal stress. The paint is formulated based on high-quality silicone resin using modern inorganic spinel pigments, which do not degrade even at temperatures around 700 °C.

The paint can be used to finish metallic parts of fireplaces, stoves, flue pipes, steam pipes, engines, heat exchangers, solar collectors. The paint is intended for coatings or spraying on constructions that are subjected to temperatures up to 700 °C short-term, and long-term up to 550 °C.

Working procedure:
1,) The paint is applied with a brush, roller, spraying, or dipping. It is better to paint the first layer. Between individual layers, maintain time intervals of at least 4 hours under normal conditions.
2.) It is optimal to let each layer dry and cure at a temperature of 230 °C for 30 minutes.
3.) The coating system does not need to be cured, but it will be softer and does not withstand the action of organic solvents. When subsequently curing the entire NS, pay attention to a gradual increase in temperature!!! The most suitable preparation of steel and cast iron substrate is blasting.

Substrate:
Remove the substrate from rust and old degraded coatings and degrease! Optimal degreasing of the substrate ... e.g., 2 × coating with special preparation IZOKOR. This is followed by the actual coating system usually 2 × CORSIL + at least 2 × BISIL Thermo. For substrate preparation and applying NS, it is recommended to adhere to the technical standards ČSN EN ISO 12944 1-8 and accompanying regulations ČSN ISO 8501 1-2, 8502 2-6, ...).

Product safety warnings (H-statements)

• H226: Flammable liquid and vapours.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P240: Ground container and receiving equipment.
• P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.
• P242: Use only non-sparking tools.
• P243: Take precautionary measures against static discharge.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P321: Specific treatment (see ... on label).
• P362: Take off contaminated clothing.
• P370+P378: In case of fire: Use extinguisher/sand/carbon dioxide according to the safety data sheet for extinguishing.
• P391: Collect spillage.
• P403+P235: Store in a well-ventilated place. Keep cool.
• P501: Dispose of contents/container according to product instructions.