
The sand-filled Het Brillant Q paint creates a striking visual effect with a structure based on the used roller and stands out for its resistance to dry abrasion. It is intended for painting masonry, plasters, drywall, cement board, particleboard, and fiberboard, monoliths, concrete panels, or suitable smooth wallpapers. It can also be applied to modified non-absorbent substrates (for example, fiber cement or hardboard). The resulting surface structure depends on the type of roller used.
Shade:
white, tinting can be done using HETCOLOR tinting paints (max. in a ratio of 1:8 parts of paint) or KOLORKA tinting preparations (max. in a ratio of 1:20). When a more intense shade is required, first apply a decorative paint tinted in the maximum allowed mixing ratio, and then cover it with a smooth interior paint in the desired final shade.
Coverage:
0.6 – 1.0 m²/kg in one layer depending on the absorbency and structure of the substrate and the thickness of the applied layer.
Application:
with a trowel, structural roller with a coarse structure
Application procedure:
1. For low-absorbent and extremely smooth substrates (drywall, plaster coatings, etc.), the priming coat is done with the penetrating preparation UP-GRUND, for highly absorbent substrates with the preparations A-GRUND or AT-GRUND. If the substrate is a non-flaking, low-absorbing original paint film, priming is not necessary. Layers of old
paints with insufficient adhesion should be scraped off.
2. After the priming coat has dried, apply one coat of undiluted and properly mixed decorative paint BRILLANT-Q with a roller (or with a trowel, and then create the structure with a roller). The more the paint is rolled out, the finer the resulting structural effect of the coating will be.
| Species: | ostatní |