REMAL Vinyl Color Matt Washable Paint for Walls, 340 Lilac Purple, 3.2 kg

Washable wall paint REMAL Vinyl Color Matt is a premium colored washable paint with a velvet matte finish, excellent coverage, and abrasion resistance. The surface of the paint is gently washable. The coating is intended for painting walls and ceilings indoors on plaster, drywall, and other substrates.

The product is easy to process, health-safe, and environmentally friendly. It shows washability and abrasion resistance when wet after 28 days - class 1. (measured according to ČSN EN ISO 11998, classified according to EN 13300). Application method: brush, roller.

Properties of the washable wall paint REMAL:

• washable wall paint
• velvet matte
• washable paint class 1. ČSN EN ISO 11998, classified according to EN 13300
• extremely covering
• wide range of shades
• easy handling
• traditional Czech production
• environmentally friendly washable paint
• health-safe
• suitable for children's rooms

Approximate yield of washable paint:

up to 12 m² /1 kg for one coat.

Technical properties of washable wall paint:

• substrate: plaster, drywall, and other substrates
• environment: interior
• dilution: water
• washability of paint class 1 - fully washable wall paint

Application procedure for washable paint:

Old non-adherent coatings in thicker layers should be scraped off. Before painting, treat the surface with REMAL deep penetration primer. This removes dust, strengthens, unifies absorbency, and ensures adhesion. Drying time: 4 hours. Level unevenness on the wall with REMAL filler. For retouching stains, like those from water leaks, it is advisable to use the isolating coat REMAL Flek-stop. Before use, mix the coating thoroughly, it is diluted for painting. If necessary, dilute with max. 5% clean water. Apply with the REMAL Vinyl roller with short pile. The coating covers in one layer. Recoat after at least 4 hours. The optimal application temperature is between 15 and 25 °C. Clean contaminated areas and tools immediately after application with water, as dried paint is difficult to remove.

Method of applying washable wall paint:

REMAL Vinyl roller with short pile, brush, airless spraying - e.g., STORCH AIRLESS ST 550, STORCH AIRLESS ST 700, or STORCH AIRLESS ST 800 recommended pressure from 120 - 150 bar, nozzle size 515 or 517, filter for the gun 50 mesh. When spraying, we always recommend performing tests on the specific equipment in advance.

Handling of washable REMAL paint:

When working, observe basic hygiene rules. The product is not intended for coatings that come into direct contact with food, animal feeds, drinking water, or for coatings on children's toys and furniture. Keep out of reach of children. If you feel unwell, seek medical attention. The product is treated with a biocide. Contains a reactive mixture: 5-chloro-2-methylisothiazol-3(2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [EC number 220-239-6] (3:1). May cause allergic reactions.

You might find useful

covering material, such as paper masking tape or covering foil, or sanding papers. Don’t forget about brushes, rollers, spatulas, and scrapers.

Washability of paint in practice is defined by the standard ABRASION RESISTANCE WHEN WET ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining abrasion resistance when wet and for determining the washability of the paint. Regarding the cleanability of coatings, it only specifies the testing method itself but does not specify the contaminating substances. After drying and conditioning, the coated sample is weighed and subjected to wet cleaning cycles in a test abrasion (cleaning) device. The loss of weight is used to calculate the average value of the reduction in the thickness of the coating. To determine cleanability, contaminating substances are applied to equally prepared samples. Specified contaminating substances are left in contact with the coating film for the prescribed time. The coated, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminating substance was removed and whether the coating is resistant to wet abrasion.

For evaluation, 5 classes are used - class 1 is the best – class 5 is the worst.