
The premium white REMAL paint coating Vinyl Matte is a washable paint for walls, characterized by a velvety matte finish, excellent coverability, easy application, and high abrasion resistance. The paint is suitable for painting interior walls and ceilings on substrates such as stucco, drywall, and other materials.
The REMAL VINYL wall coating offers effortless processing and shows washability and abrasion resistance after 28 days - class 1. (measured according to ČSN EN ISO 11998, classified according to EN 13300).
up to 12 m² /1 kg for one coat.
You must scrape off any original non-adhering layers of paint that are thicker. Before painting, prime the surface with REMAL deep penetration primer, which will remove dust, strengthen the surface, unify its absorbency, and ensure proper adhesion. Drying time is 4 hours. To level out unevenness on the walls, use REMAL filler. For stains, such as those from leaks, we recommend treating them with REMAL Flek-stop isolation coating. Before use, thoroughly mix the coating; it is thinned for painting. If necessary, thin with a maximum of 5% clean water. Apply using the REMAL Vinyl roller with a short nap. The coating covers in one layer. Recoat after at least 4 hours. The optimal application temperature is between 15 and 25 °C. Clean any soiled areas and tools immediately after application with water, as dried paint is difficult to remove.
Method of application for washable wall paint:
Use a REMAL Vinyl roller with a short nap, brush, or AIRLESS spraying - for example, STORCH AIRLESS ST 550, STORCH AIRLESS ST 700, or STORCH AIRLESS ST 800 recommended pressure from 120 – 150 bar, nozzle size 515 or possibly 517, filter for the gun 50 mesh. When spraying, we always recommend conducting tests on the specific equipment beforehand.
covering materials, such as paper adhesive tape or covering foil, or even sanding papers. You will also find brushes, rollers, sponges, and spatulas useful.
| Species: | ostatní |