REMAL Plus Highly Covering Wall Paint, 13+2 kg

REMAL Plus paint is a classic natural water-dilutable kaolin-based wall paint. It offers excellent coverage, is breathable, abrasion-resistant, and has a standard whiteness of 86%. REMAL wall paint is used for painting walls and ceilings in interiors for painting plaster, concrete, as paint for drywall, cetris boards, particleboard, and renovation plasters. The paint shows resistance to wet abrasion according to ČSN EN ISO 11998 – class 5. (classification according to EN 13300).

REMAL Plus wall paint is easy to process, health-safe, and environmentally friendly. The paint is suitable for painting mineral surfaces in moderately demanding interiors, such as walls and ceilings of bedrooms, living rooms, or hallways, as well as offices, schools, etc.

All REMAL paints are produced in the Czech Republic, the paints are environmentally safe, gentle on the environment. All REMAL paints are tintable, where you can use liquid tinting colors, or have the paints mixed directly at our stores.

Features of REMAL Plus white wall paint:

• traditional Czech white wall paint REMAL
• for coatings of living and utility spaces.
• suitable for walls, ceilings, plasters, concrete, or drywall in interiors
• highly breathable and vapor-permeable wall paint
• high covering ability
• easy to process
• water-dilutable natural paint
• suitable for children's rooms
• health-safe
• tintable paint
• easily washable wall paint
• wet abrasion resistance class 5

Technical properties of REMAL Plus wall paint:

• coverage 13 m²/1 kg in one layer
• tinting REMAL liquid tinting paint or REMAKOL
• for indoor plasters and drywall
• water-dilutable paint
• application by roller or brush
• whiteness 86 %
• resistance to wet abrasion after 28 days - class 5. (measured according to ČSN EN ISO 11998, classification according to EN 13300)
• viscosity 5000 - 7000 mPas (Brookfield HB DV 2+ 4/100)
• content of non-volatile substances 48 - 56%
• pH 8 - 11

Work procedure for REMAL paint:

Before painting, remove layers of old and non-adhering coatings. Treat absorbent substrates with REMAL universal primer, treat non-adhering and crumbling substrates with REMAL deep primer. This will remove dust from the surface, strengthen it, unify absorbency, and guarantee adhesion of the coating. The drying time is 4 hours. Level out any imperfections on the wall with REMAL Putty. Dilute the paint in a ratio of max. 0.4 l of water to 1 kg of paint. Then mix thoroughly.

Apply the paint with a brush, roller, or spraying in 2 layers, applying the next layer of paint after the previous one has dried, at least after 4 hours. The optimal temperature for painting is 15 to 25 °C. The temperature of the substrate and the environment must not drop below 5 °C during the application of the wall paint. For uniform areas, use product from the same batch of paint; mix different batches together before use.

Handling with REMAL wall paint:

When working, observe basic hygiene rules. The product is not intended for coatings that come into direct contact with food, animal feed, drinking water, or for coatings of children's toys and children's furniture. Keep out of reach of children. If you do not feel well, seek medical attention.

The product is treated with a biocide. It contains 1,3,5-tris(2-hydroxyethyl)hexahydro-1,3,5-triazin, 1,2-benzoisothiazol-3(2H)-on+, octhilinone (ISO), reaction mixture: 5-chlor-2-methylisothiazol-3(2H)-on [ES number 247-500-7] and 2-methylisothiazol-3(2H)-on [ES number 220-239-6] (3:1). It may cause an allergic reaction.

You may find useful

covering materials, such as paper adhesive tape or covering foil, or sanding papers. Don't forget brushes, rollers, spatulas, and scrapers.

Washability of the paint is practically addressed by the standard WET ABRASION RESISTANCE ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining wet abrasion resistance and the washability of paint. Regarding the cleanability of coatings, it only specifies the testing method itself, but does not specify contaminating substances. After drying and conditioning, the coated sample is weighed and subjected to wet cleaning cycles in the test abrasion (cleaning) device. From the weight loss, the average loss of coating thickness is calculated. To determine cleanability, the contaminating substances are applied to equally prepared samples. The specified contaminating substances are left in contact with the coating for the prescribed time. The coated, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminating substance has been removed and whether the coating is resistant to wet abrasion.

For evaluation, 5 classes are used - class 1 is the best – class 5 is the worst. Grading is like in school.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.